Loading ...
Loading ...
Loading ...
31
SOFT WARE UPGRADES
• To ensure the best performance from your robot please
ensure that the robot's software is regularly upgraded.
You can do this either by registering for automatic
upgrades via the Dyson Link app or by manually
downloading an upgrade via your computer. See
'Software updates' section.
DISABLE WI-FI
• Your robot is automatically set to periodically send out
a wi-fi signal that can be picked up as a local network
(also called ‘AP’ mode.) If desired this mode can be
switched ‘OFF’ by following the instructions below.
• Download the ‘Disable wi-fi’ software from the Dyson
website on to a USB stick. Make sure this software is
the only item on the USB stick and the stick has at least
256MB of free space.
• Remove the post-motor filter and filter cover and insert
the USB stick into the USB port.
Manually replace the robot on a powered dock and
ensure it is charging.
• Press the power button until a ring of pink lights flash,
then release the button. The software will automatically
switch ‘OFF’ wi-fi mode.
• Once complete the robot will turn off.
• Remove the USB and replace the filter and filter cover.
The robot is now ready to use as normal.
ENABLE WI-FI
• If you want to enable the robot to emit a wi-fi signal
again, follow the same steps as above but instead
download the ‘Enable wi-fi mode’ software from the
Dyson website.
RESETTING THE ROBOT
• If ownership of the robot changes, you may wish to
reset the robot so that home network names and
passwords are cleared.
• To reset the robot, follow the same steps as the 'disable
wi-fi' section but instead download the 'reset robot'
software from the Dyson website.
BATTERY SAFETY INSTRUCTIONS
• If the battery needs replacing please contact the
Dyson Helpline.
• The battery is a sealed unit and under normal
circumstances poses no safety concerns. In the unlikely
event that liquid leaks from the battery do not touch the
liquid and observe the following precautions:
• Skin contact – can cause irritation. Wash with soap
and water.
• Inhalation – can cause respiratory irritation. Expose to
fresh air and seek medical advice.
• Eye contact – can cause irritation. Immediately flush
eyes thoroughly with water for at least 15minutes. Seek
medical attention.
• Disposal – wear gloves to handle the battery and
dispose of immediately, following local ordinances
or regulations.
CAUTION
• The battery used in this machine may present a risk of
fire or chemical burn if mistreated. Do not disassemble,
short contacts, heat above 140°F(60°C), or incinerate.
Replace battery with a Dyson battery only: use of any
other battery may present a risk of fire or explosion.
Dispose of used battery promptly. Keep away from
children. Do not disassemble and do not dispose of
in fire.
DISPOSAL INFORMATION
• Dyson products are made from high grade recyclable
materials. Recycle where possible.
• The battery should be removed from the product
before disposal.
• Dispose of or recycle the battery in accordance with
local ordinances or regulations.
DYSON CUSTOMER CARE
THANK YOU FOR CHOOSING TO BUY A
DYSON MACHINE
If you have a question about your Dyson machine, call
the Dyson Helpline with your serial number and details
of where and when you bought the machine.
Most questions can be solved over the phone by one of
our Dyson Helpline staff.
If your Dyson machine needs service, call the Dyson
Helpline so we can discuss the available options. If your
Dyson machine is under warranty, and it is a covered
repair, it will be repaired at no cost.
Your serial number can be found on your rating plate
which is on the base of the machine.
Loading ...
Loading ...
Loading ...