Loading ...
Loading ...
Loading ...
Mavic 2 Pro/Zoom User Manual
©
2019 DJI All Rights Reserved.
47
Linking the Remote Controller
The remote controller is linked to your aircraft before delivery. Linking is only required when using a new
remote controller for the rst time. Follow these steps to link a new remote controller:
1. Power on the aircraft and the remote controller.
2. Launch DJI GO 4.
3. Enter “Camera” and tap on and then tap the button to conrm. The remote controller is ready
to link.
4. Locate the link button on the side of the aircraft, as shown in the figure below. Press the link
button to start linking. The Linking Status Indicator displays solid green once the remote controller
successfully links to the aircraft, and the LCD screen on the remote controller displays the aircraft’s
information.
Link Button
Linking Status Indicator
the Primary remote controller has stopped controlling the gimbal dial for two seconds or more, the
Secondary remote controller can control the gimbal dial.
2. Control Stick
Both the Primary remote controller and the Secondary remote controller can control the orientation
of the aircraft using control sticks. The Primary remote controller has priority. The Secondary remote
controller is unable to control the aircraft’s orientation when the Primary remote controller is operating
the control sticks. After the control sticks are idle for two seconds or more, the Secondary remote
controller can control the aircraft’s orientation.
If the control sticks on the Primary remote controller are pushed down and inward, the motors of the
aircraft stop. If the same action is performed on the Secondary remote controller, however, the aircraft
does not respond.
The control sticks on the Primary remote controller need to be released so that the Secondary remote
controller can control the aircraft.
3. Flight Mode Switch
The ight mode can only be switched on the Primary remote controller. The Flight Mode Switch is
disabled on the Secondary remote controller.
4. DJI GO 4 Settings
The display and parameter settings for the Primary and Secondary remote controllers in DJI GO 4
are the same. The Secondary remote controller can only congure the ight controller, vision system,
video transmission, and Intelligent Flight Battery. Display and parameter settings for the Primary and
Secondary remote controllers are the same in DJI GO 4.
Loading ...
Loading ...
Loading ...