Loading ...
Loading ...
Loading ...
Preparing your oven
1. Pleaseremoveallstickers,leaetsandboxesfromthe
doorsandtheooroftheovenbeforeoperation.
2. Please wipe out the oven interior prior to operation with
warm soapy water and polish dry with a soft clean cloth.
Do not close the oven door until the oven is completely dry.
Setting the time
Afterelectricallyconnectingtheappliance,youmustsetthe
time of day before you can operate your oven.
1. Aftertheappliancehasbeenelectricallyconnected
“12:00”willashontheclockdisplay,alongwiththe
scrollingmessage“WelcometoElectrolux”.
2. To set the time of day in hours and minutes, press the
or buttonsunderneaththe“setclock”graphic.
3. 8 seconds after the last change the time will stop
ashing,conrmingthetimehasbeenset.Oncethe
time has been entered, the clock advances minute
by minute.
Note:
Installing your oven accessories
• Catalyticliners(ifsupplied)
Theoven/swillalreadybettedwithacatalyticfan
bafeandtoppanel.Wehavesuppliedsidepanels
for you to fit. They can be fitted before you put the side
racks on but you can omit them, if you wish, with no
effect to cooking performance. Their sole purpose is
to make oven cleaning easier. Of course, you can
add them at any time by removing the side racks
(see page 22).
The catalytic liners will attach to each side of the oven.
There will be a left hand and a right hand version.
1. Position the first liner as per the diagram. The black,
shiny side of the liner should be facing the oven wall,
thehookspointingdown.Notethatthediagram
shows the left hand liner. The right hand side will be
a mirror image of this.
2. Line the hooks up with the slots provided in the
oven wall, push them in and then allow the liner to
slide down to its final position. All4hooksMUST
be engaged in slots.
3. The access hole for the side racks should be visible
when the liner is correctly positioned – see diagram.
Beforeusingyourelectroniccontrolor
touch control oven
Note:
• Sideracks
1.Insertthetwinpeggedsideintotherearaccess
holes provided
2. Then locate the front peg into the front access hole
and push in firmly.
Note:
10 before using your electronic control oven electrolux e:line ovens electrolux e:line ovens before using your electronic control oven 11
• Shelvesandtrays
The shelves are designed so that they have maximum
extension but cannot be accidentally pulled right out.
The trays are designed the same way and slot straight
into the side racks.
Totashelfortraytosideracks:
1.Locatetherearedgeoftheshelf/trayinbetween2
guide rails of the side rack – see diagram. Ensure
the same rail positions on both sides of the oven are
being engaged.
2.Withthefrontedgeraised,begintoslidetheshelfinto
the oven.
3. Once the detents have passed the front edge of the
side rack, the shelf can be pushed completely in.
Whenfullyinsertedtheshelf/trayshouldnotinterfere
with the closed oven door.
To fit a shelf or tray to telescopic slides:
1.Withtheslidesfullypushedin,pushtheshelfortray
along the top of the slide until it hits the back post.
2. Drop the front of the shelf or tray onto the slide
ensuring it sits behind the front post of the slide.
Whenfullyinsertedtheshelf/trayshouldnotinterfere
with the closed oven door.
• Fatlter(ifsupplied)
The fat filter is designed to go onto the front of the fan
coverattherearoftheoven.Whenfullyengagedthe
filter will be positioned in the centre of the fan cover.
1. Locate the mounting slots in the fan cover and the
corresponding tags on the fat filter.
2. Position the fat fiter onto the fan cover with the tags
pointing down.
3. Push the fat filter down into position.
• Fatlter(ifsupplied)
The fat filter is designed to go onto the front of the fan
coverattherearoftheoven.Whenfullyengagedthe
filter will be positioned in the centre of the fan cover.
1. Locate the mounting slots in the fan cover and the
corresponding tags on the fat filter.
2. Position the fat fiter onto the fan cover with the tags
pointing down.
3. Push the fat filter down into position.
Loading ...
Loading ...
Loading ...