Loading ...
Loading ...
Loading ...
The entry/exit function can be adjusted or
canceled through “Vehicle Settings” in the
vehicle information display by performing
the following:
∙ Switch the “Exit Seat Slide” from ON to
OFF. For additional information, refer to
“Vehicle Settings” in the “Instruments
and controls” section of this manual.
SYSTEM OPERATION
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
∙ When the vehicle speed is above 0 mph
(0 km/h) or 4 mph (7km/h) for some
limited functions such as linking a key
fob to the meter when the power
source is turned on from off or during
the Exit function.
∙ When any of the memory switches are
pushed while the automatic drive posi-
tioner is operating.
∙ When the adjusting switch for the driv-
er’s seat is turned on while the auto-
matic drive positioner is operating.
∙ When the seat has already been moved
to the memorized position.
∙ When no seat position is stored in the
memory switch.
∙ When the shift lever is moved from P
(Park) to any other position.
Pre-driving checks and adjustments 3-41
Loading ...
Loading ...
Loading ...