Loading ...
Loading ...
Loading ...
ASSIST CHARGE GAUGE
The assist charge gauge indicates the con-
dition of the electric motor. When the
needle is between the center and “charge”
(
䊊
1
range), this indicates that the electric
motor is generating power to recharge the
Li-ion battery.
When the needle is between the center and
the PWR side, this indicates that the electric
motor is powering the drive wheels and the
Li-ion battery is discharging.
This unit measures terrestrial magnetism
and indicates the heading direction of the
vehicle.
With the ignition switch in the ON position,
press the
button as described in the
charts below to activate various features of
the automatic anti-glare rearview mirror.
Press and hold
the
button for
about:
Feature:
(Press button again for about
1 second to change settings)
1 second Compass display toggles on/off
8 seconds
Compass zone can be changed
to correct false compass read-
ings
10 seconds
Compass enters calibration
mode
For additional information about the auto-
matic anti-glare feature, refer to “Auto-
matic anti-glare rearview mirror” in the
“Pre-driving checks and adjustments” sec-
tion of this manual.
COMPASS DISPLAY
Press the button for about one sec-
ond when the ignition switch is placed in
the ON position to toggle the compass di-
rection display
䊊
1
on or off. The display will
indicate the direction that the vehicle is
heading.
N: North
E: East
S: South
W: West
If the display reads “C”, calibrate the com-
pass by driving the vehicle in three com-
plete circles at less than 5 mph (8 km/h).
LIC2544 LIC1487
COMPASS (if so equipped)
Instruments and controls 2-7
Loading ...
Loading ...
Loading ...