Loading ...
Loading ...
Loading ...
NOTE:
If the pinch strip is damaged or removed,
the power close function will not oper-
ate.
WARNING
There are some small distances imme-
diately before the closed position which
cannot be detected. Make sure that all
passengers have their hands, etc., in-
side the vehicle before closing the
liftgate.
Manual Mode:
If power operation is not available, the lift-
gate may be operated manually. Power op-
eration may not be available under the fol-
lowing conditions:
∙ Multiple obstacles have been detected
in a single power cycle
∙ Battery voltage is low
If the power liftgate open switch
䊊
A
is
pushed during power open or close, the
power operation will be canceled and the
liftgate can be operated manually.
To open the liftgate manually, push the lift-
gate open switch
䊊
A
and raise the liftgate.
To close, lower and push the liftgate down
securely.
MOTION-ACTIVATED LIFTGATE (if
so equipped)
The liftgate can be operated using a quick
kicking motion under the center of the rear
bumper.
To operate, the Intelligent Key must be
within 31.5 in (80 cm) of the liftgate.
NOTE:
Accessory receivers are available for this
vehicle. If an accessory receiver is in-
stalled, the liftgate electronic control
unit (ECU) needs to be replaced with an
ECU compatible with the accessory re-
ceiver for the Motion-Activated Liftgate
to function properly.
LCE2321
Pre-driving checks and adjustments 3-27
Loading ...
Loading ...
Loading ...