Loading ...
Loading ...
Loading ...
24
Error display Please check
—
Please check before requesting a repair.
If the rice cooker is still not back to normal after the above is confirmed, go to the Panasonic
authorized service center for repair.
→Wash it thoroughly before it is installed.
●
Has the pan being set?
→Press the [Cancel/Off] key until the error display disappears. Put the
dedicated pan in, and perform the operation again.
●
Is any foreign object attached to the bottom of the pan or the bottom sensor?
→Please remove foreign objects and dirt, and then press the [Cancel/Off] key.
●
Is water too much?
→Press the [Cancel/Off] key.
(For continuous cooking, you can slightly reduce the amount of water)
●
Is there any foreign object or oil dirt inside the steam cap (taste catcher)?
19
7
—
●
Is the outer lid open? —
●
Is the steam cap (taste catcher) mounted?
→If it is lost, please consult a Panasonic authorized service center.
You can still cook without the steam cap (taste catcher), but
①Rice taste will deteriorate. (Rice will become dry during keep warm)
②Water may overflow when boiled.
③“U15” may be displayed again when cooking is finished.
④This may cause congee or porridge unable to be properly cooked.
19
●
●
7
—
●
Keep warm duration over 96 hours?
→Please press [Cancel/Off] key.
12
●
Try to unplug the power plug and plug it in again.
If “H※※” still appears, then there is a fault.
→Please consult the Panasonic authorized service center, and inform the error
code (two digits after “H”).
—
Error Messages
Has any dust or other foreign object clogged the intake port and the
exhaust port at the bottom of the rice cooker?
→Remove dust according to the following steps.
①Press the [Cancel/Off] key, and then unplug the power plug.
②Remove the inner pan until the rice cooker cools down.
③Clear the dust in the intake port/exhaust port at the bottom of the rice
cooker. ( P19)
Is the rice cooker used on the carpet?
→Do not use the rice cooker where the bottom of the rice cooker may be clogged.
Ref.
page
Loading ...
Loading ...
Loading ...