Loading ...
Loading ...
Loading ...
78 Servicing Your Honda
Clutch System
1. Drain the engine oil (page 65).
2. Remove the clutch cover A bolts (1), washer
(2), clutch cover B bolt (3), clutch cover C
bolts (4) and clutch cover (5).
3. Remove the five clutch spring bolts and
springs (6).
Loosen the bolts in a crisscross pattern in two or
three progressive steps.
4. Remove the clutch pressure plate (7).
5. Check the operation of the bearing (8) with
your finger. The bearing should turn smoothly
and quietly.
If the operation is not smooth, refer to an official
Honda Service Manual (page 186) for bearing
disassembly or see your dealer.
6. Remove the clutch lifter (9) first, then remove
the clutch lifter rod (10).
7. Remove the eight clutch discs, seven clutch
plates, judder spring and spring seat (11).
Clutch Disc/Plate Removal
(1) clutch cover A bolts (4) clutch cover C bolts
(2) washer (5) clutch cover
(3) clutch cover B bolt
(2)
(4)(5)
(1)
(3)
(6) clutch spring bolts and springs
(7) clutch pressure plate
(8) bearing
(7)
(6)
(8)
(9) clutch lifter (10) clutch lifter rod
(11) clutch discs, clutch plates, judder spring and spring
seat
(10)
(9)
(11)
Loading ...
Loading ...
Loading ...