Loading ...
Loading ...
Loading ...
Engine Oil
(cont’d)
Servicing Your Honda 65
1. Run the engine at idle for 3 minutes, then shut
it off.
2. Wait 3 minutes after shutting off the engine to
allow the oil to properly distribute itself in the
engine.
3. Support the CRF in an upright position on a
level surface.
4. Check that the oil level is between the upper
(1) and lower (2) level marks in the oil level
inspection window (3).
• If the oil is at or near the upper level mark,
you do not have to add oil.
• If the oil is below or near the lower level
mark, remove the oil fill cap (4) and add the
recommended oil until it reaches the upper
level mark. (Do not overfill.)
5. Check that the O-ring (5) is in good condition
and replace it if necessary.
6. Reinstall the engine oil fill cap (4).
7. Check for oil leaks.
1. Remove the engine guard A bolts/washers (1),
B bolt/washer (2) and engine guard (3).
2. Run the engine at idle for 3 minutes, then shut
it off.
3. Support the CRF in an upright position on a
level surface.
Checking & Adding Oil
(1) upper level mark
(2) lower level mark
(3) inspection window
(4) engine oil fill cap
(1)
(2)
(3)
(4)
(4) engine oil fill cap
(5) O-ring
(4)(5)
Changing Engine Oil & Filter
(1) engine guard A bolts/washers
(2) engine guard B bolt/washer
(3) engine guard
(1)
(2)
(3)
Loading ...
Loading ...
Loading ...