Loading ...
Loading ...
Loading ...
Servicing Your Honda 67
Engine Oil
NOTICE
If the oil filter is not installed properly, it will
cause serious engine damage.
14. Apply engine oil to a new O-ring and install it
to the oil filter cover.
15. Install the oil filter cover being careful not to
damage the new O-ring, then tighten the oil
filter cover bolts to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
16. Install the engine guard, then tighten the
engine guard A bolts/washers and B bolt/
washer to the specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
17. Fill the crankcase with the recommended oil.
Capacity:
1.18 US qt (1.12 ℓ) after draining and filter
change
1.14 US qt (1.08 ℓ) after draining
18. Install the engine oil fill cap.
19. Check the engine oil level by following the
steps in Checking & Adding Oil (page 65).
Pour the drained oil into a suitable container and
dispose of it in an approved manner (page 166).
NOTICE
Improper disposal of drained fluids is harmful to
the environment.
Loading ...
Loading ...
Loading ...