Loading ...
Loading ...
Loading ...
52 Servicing Your Honda
Fuel System (CRF250R)
11. Install the fuel pump plate (32) by aligning its
groove (33) with fuel pump unit lug (34).
Check the dust seal lug (24) is in position as
shown.
12. Install the conical spring washers (35), collars
(36), washer (37), stopper cable (38), stopper
cable guide (39), fuel pump mounting nuts (40)
and fuel pump mounting cap nut (41).
Make sure that the convex surfaces of the conical
spring washers are upside.
Make sure that the cap nut is in position of the
identification mark (42) on the fuel pump plate
(32).
13. Tighten the fuel pump mounting nuts (40) and
cap nut (41) to the specified torque in the
specified sequence as shown:
8 lbf·ft (11 N·m, 1.1 kgf·m)
14. Install the harness band clip (43) to the stopper
cable guide (39).
15. Install the stopper cable (38) to the frame hook
(44) of the frame while holding the fuel tank
(30).
16. Connect the fuel line (page 46).
17. Increase the fuel pressure (page 53).
18. Install the fuel tank (page 35).
(24) dust seal lug
(32) fuel pump plate
(33) groove
(34) fuel pump unit lug
(24) (33)
(34)
(32)
(32) fuel pump plate
(35) conical spring washers
(36) collars
(37) washer
(38) stopper cable
(39) stopper cable guide
(40) fuel pump mounting nuts
(41) fuel pump mounting cap nut
(42) identification mark
(36)
(37)
(35)
(40)
(32)(42)
(35)
Upside
(39)
(38)
(41)
(40) fuel pump mounting nuts
(41) fuel pump mounting cap nut
(30) fuel tank (43) harness band clip
(38) stopper cable (44) frame hook
(39) stopper cable guide
1
2
3
4
5
6
(40)
(41)
(44)
(30)
(39)
(38)
(43)
Loading ...
Loading ...
Loading ...