Loading ...
Loading ...
Loading ...
Troubleshooting en
53
Errors Cause Troubleshooting
Detergent residue is present
in the detergent dispenser or
the tablet collecting tray.
Spray arms were blocked by
tableware so detergent was
not rinsed out.
▶
Check that the spray arms are not
blocked and can rotate freely.
Detergent dispenser was
damp when detergent was ad-
ded.
▶
Only add detergent to a detergent dis-
penser when dry.
Excessive formation of foam
occurs.
Hand washing-up liquid is
present in dispenser for rinse
aid.
▶
Immediately add rinse aid to the dis-
penser.
→"Adding rinse aid", Page31
Rinse aid has been spilled.
▶
Remove the rinse aid with a cloth.
Detergent or appliance care
product used causes excess-
ive foaming.
▶
Change the brand of detergent.
Information on display panel
Errors Cause Troubleshooting
Special salt refill indicator
lights up.
Insufficient special salt.
▶
Add Special salt →Page29.
Sensor does not detect spe-
cial salt tablets.
▶
Do not use special salt tablets.
Refill indicator for special salt
does not light up.
Water softening system is
switched off.
▶
Setting water softening system
→Page29
Refill indicator for rinse aid
lights up.
Insufficient rinse aid. 1. Add Rinse aid →Page31.
2. Set the amount of rinse aid to be dis-
pensed.
Refill indicator for rinse aid
does not light up.
Rinse aid system is switched
off.
▶
→"Setting the amount of rinse aid",
Page32
Display flashes. Appliance door is not closed
properly.
▶
Close the appliance door.
‒ Arrange the tableware so that
no parts project beyond the
basket and prevent the appli-
ance door from closing prop-
erly.
Machine Care indicator lights
up.
Machine care is recommen-
ded.
▶
Run the Machine Care programme
without tableware.
‒ Use a special machine care
product.
The indicator will go out automatically
after 3 wash cycles whether Machine
Care is carried out or not.
Loading ...
Loading ...
Loading ...