Loading ...
Loading ...
Loading ...
en Before using for the first time
28
Appliance height 86.5cm with cutlery basket
Level Top basket Bottom basket
1 max. ø 24 cm 34 cm
2 max. ø 26.5 cm 30.5 cm
3 max. ø 29 cm 28 cm
Appliance height 86.5cm with cutlery drawer
Level Top basket Bottom basket
1 max. ø 18 cm 34 cm
2 max. ø 20.5 cm 30.5 cm
3 max. ø 23 cm 28 cm
Before using for the
first time
Configure the settings for initial start-
up.
Performing initial start-up
On initial start-up or after a reset to the
factory settings, you will need to make
settings.
Requirement:The appliance has been
installed and connected. →Page13
1.
Add special salt. →Page29
2.
Add rinse aid. →Page31
3. Switch on the appliance.
→Page37
4. Set the water softening system.
→Page29
5. Set the amount of rinse aid to be
dispensed. →Page32
Tip:You can change these settings
and other Basic settings →Page39 at
any time.
Water softening system
Hard water leaves limescale on the tub
and tableware and parts of the appli-
ance may become blocked.
To ensure good dishwashing results,
you can treat the water with special salt
and the water softening system. To
avoid damage to the appliance, water
with a hardness above 9 °E must be
softened.
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here.
You can find out how hard your water is from your local water company or by using
a water hardness tester.
Water hardness °E Hardness range mmol/l Setting value
0 - 8 Soft 0 - 1.1 H:00
9 - 10 Soft 1.2 - 1.4 H:01
Loading ...
Loading ...
Loading ...