Loading ...
Loading ...
Loading ...
Troubleshooting en
51
Errors Cause Troubleshooting
Tea residue or lipstick marks
on tableware.
Too little detergent is being
used or is unsuitable.
▶
Use a suitable Detergent →Page32
and follow the manufacturer's instruc-
tions for the amount to be used.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
▶
Only remove large remnants of food
and do not prerinse tableware.
▶
Adjust the sensitivity of the sensors.
Coloured coatings (blue, yel-
low, brown) that are difficult or
impossible to remove are
present inside the appliance
or on stainless steel table-
ware.
The formation of films is due
to substances contained in ve-
getables (cabbage, celery,
potatoes, noodles, etc.) or tap
water (manganese).
▶
Clean the appliance.
You can remove deposits with Mech-
anical cleaning →Page40 or a ma-
chine cleaning product. It may not al-
ways be possible to completely re-
move deposits but they are harmless
to health.
The formation of films is due
to metal components on silver
or aluminium tableware.
▶
Clean the appliance.
You can remove deposits with Mech-
anical cleaning →Page40 or a ma-
chine cleaning product. It may not al-
ways be possible to completely re-
move deposits but they are harmless
to health.
Coloured deposits (yellow, or-
ange, brown) that are easy to
remove are present inside the
appliance (mainly at the bot-
tom).
The formation of films is due
to ingredients of food rem-
nants and tap water (limes-
cale) "soaplike".
1. Check the setting of the water soften-
ing system.
→"Setting water softening system",
Page29
2. Add special salt.
→"Adding special salt", Page29
3. If you are using combined detergents
(tabs), activate the water softening
system.
Follow the information about deter-
gents.
→"Information on detergents",
Page33
Plastic parts inside the appli-
ance are discoloured.
Plastic parts inside the appli-
ance may become discol-
oured during the life of the
dishwasher.
▶
Discolouration can come about and
will not impair functioning of the ap-
pliance.
Plastic parts are discoloured. Washing temperature is too
low.
▶
Select a programme with a higher
washing temperature.
Loading ...
Loading ...
Loading ...