Loading ...
Loading ...
Loading ...
Cleaning and servicing en
41
Self-cleaning interior
1
To remove deposits, the appliance self-
cleans the interior at regular intervals.
The programme sequence is automat-
ically adjusted for self-cleaning, e.g. the
cleaning temperature is briefly in-
creased. Consumption values, e.g. wa-
ter and electricity, may also increase.
If the interior is no longer self-cleaned
adequately and deposits occur, see
this information:
→"Cleaning the tub", Page40.
Cleaning products
Only use suitable cleaning products to
clean your appliance.
→"Safe use", Page11
Tips on appliance care
Follow the tips on appliance care to
make sure your appliance functions
properly at all times.
Action Benefit
Wipe the door seals,
the front of the dish-
washer and the control
panel regularly using a
damp cloth and wash-
ing-up liquid.
This ensures the parts
of the appliance will re-
main clean and hy-
gienic.
If the appliance is not
going to be used for a
while, leave the door
slightly ajar.
This will prevent un-
pleasant odours.
Machine Care
1
Deposits can cause your dishwasher to
malfunction, e.g. due to grease or
limescale. To avoid such faults and re-
duce odours, we recommend cleaning
your appliance at regular intervals.
Machine Care combined with commer-
cially available machine care products
is the right programme for the care of
your appliance.
Run Machine Care without tableware if
the indicator for Machine Care lights up
on the control panel or if advised to do
so by the display. Once you have run
the Machine Care programme, the in-
dicator goes out. If your appliance
does not have a reminder function, fol-
low the directions for use on the ma-
chine care products.
Performing Machine Care
Run the Machine Care programme if
the indicator for Machine Care lights up
on the control panel or if advised to do
so by the display.
Notes
¡ Run the Machine Care programme
without any tableware in the dish-
washer.
¡ Only use suitable machine care
products specially designed for dish-
washers and not dishwasher deter-
gent. Observe the manufacturer's in-
structions.
¡ Make sure that there are no alu-
minium parts in the interior of the ap-
pliance.
¡ If you have not run Machine Care
after 3 washing cycles, the indicator
for Machine Care will go out auto-
matically.
¡ Follow the safety instructions and the
directions for use on the packagings
of the machine care products.
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...