Loading ...
Loading ...
Loading ...
MAINTENANCE AND SERVICE
}}
555
Replacing rear turn signal bulbs
The rear turn signal bulbs are located behind the
panel in the side of the cargo compartment.
1. Press in the top edge of the panel cover to
remove it.
2. Move aside the insulation to access the sup-
port bridge.
3. Unscrew the spring bolt counter-clockwise
and remove the supporting bridge. It is sim-
plest to leave one screw in place in the sup-
port bridge.
4. Remove the gray bulb holder by turning it
counterclockwise and pulling it out.
5. Remove the bulb by pressing it in and turn-
ing it counterclockwise.
6. Insert the new bulb by pressing it in and
turning it clockwise.
7. Put the panel back in place and turn it clock-
wise.
8. Install the support bridge using the supplied
spring screw and make sure that the clip is
positioned correctly. Tighten the spring screw
until it stops (max. 2 Nm).
9. Reposition the insulation, hook the panel and
then press it back into place.
Loading ...
Loading ...
Loading ...