Loading ...
Loading ...
Loading ...
LIGHTING
* Option/accessory.
146
Using turn signals
The vehicle's turn signals are controlled using
the left-side steering wheel lever. The turn sig-
nals flash three times or continuously, depend-
ing on how far up or down the lever is moved.
Turn signals.
Triple flash indicator
Move the steering wheel lever up or down to
the first position and release. The turn sig-
nals will flash three times. This function can
be activated/deactivated in the center dis-
play.
NOTE
•
This automatic flashing sequence can be
interrupted by immediately moving the
lever in the opposite direction.
•
If the turn signal indicator flashes more
quickly than normal, refer to the message
in the instrument panel.
Continuous flashing sequence
Move the lever up or down as far as possible.
The lever will stop in its end position and can be
moved back manually or automatically by moving
the steering wheel.
Related information
•
Hazard warning flashers (p. 149)
•
Adjusting light functions via the center dis-
play (p. 141)
•
Replacing rear turn signal bulbs (p. 555)
Active Bending Lights*
Active Bending Lights (ABL) are designed to
help provide maximum illumination in curves and
intersections. Depending on equipment level,
vehicles with LED
5
headlights* may be equipped
with Active Bending Lights.
Headlight pattern with function deactivated (left) and
activated (right).
Active Bending Lights follow the movement of
the steering wheel to help provide maximum illu-
mination in curves and intersections, improving
visibility for the driver.
The function is automatically activated when the
engine is started. If a fault is detected in the sys-
tem, the
symbol will illuminate in the
instrument panel and a message will be dis-
played.
5
LED (Light Emitting Diode)
Loading ...
Loading ...
Loading ...