Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
}}
* Option/accessory.
413
WARNING
•
Batteries generate hydrogen gas, which
is flammable and explosive.
•
Do not connect the jumper cable to any
part of the fuel system or to any moving
parts. Avoid touching hot manifolds.
•
Battery fluid contains sulfuric acid. Do not
allow battery fluid to contact eyes, skin,
fabrics or painted surfaces.
•
If contact occurs, flush the affected area
immediately with water. Obtain medical
help immediately if eyes are affected.
•
Never expose the battery to open flame
or electric spark. Do not smoke near the
battery. Failure to follow the instructions
for jump starting can lead to injury.
Related information
•
Starting the vehicle (p. 372)
•
Ignition modes (p. 374)
•
Adjusting the steering wheel (p. 181)
•
Selecting ignition mode (p. 376)
Detachable towbar*
Volvo recommends the use of Volvo towbars
that are specially designed for the vehicle.
NOTE
The optional detachable trailer hitch may not
be available in all markets or on all models.
Consult your Volvo retailer.
Ball holder
Cotter pin
Towbar assembly
Locking bolt
Safety wire attachment bracket
Installing the ball holder
1. If necessary, remove the cotter pin from the
locking bolt and slide the locking bolt out of
the towbar assembly.
2. Slide the ball holder into the towbar assem-
bly.
3. Align the hole in the ball holder with the one
in the towbar assembly.
4. Slide the locking bolt through the towbar
assembly/ball holder.
5. Insert the cotter pin in the hole at the end of
the locking bolt.
WARNING
•
Be sure the towbar is securely locked in
position before attaching anything to it.
•
Always attach the trailer's safety wire
securely to the towbar's safety wire
attachment bracket.
Removing the ball holder
1. Remove the cotter pin from the locking bolt
and slide the locking bolt out of the ball
holder/towbar assembly.
2. Pull the ball holder out of the towbar assem-
bly.
Loading ...
Loading ...
Loading ...