Loading ...
Loading ...
Loading ...
32
A4: Yes. You should plug the powerline adapters into the wall receptacles in a same electric circuit if you want to
create a powerline network.
Q5: How to pair two adapters?
A5: Perform the following steps:
1. Plug one adapter into a wall receptacle, and plug the other adapter into another wall receptacle nearby.
2. Press the pair button on the first adapter. The PLC LED indicator blinks.
3. Press the pair button on the second adapter. The PLC LED indicator blinks.
When the PLC LED indicators on both adapters turn solid on, they succeed in pairing with each other.
4.4 Safety and Emission Statement
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable.
Declaration of Conformity
Hereby, SHENZHEN TENDA TECHNOLOGY CO. LTD. declares that the radio equipment type PA6 is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.tendacn.com/en/service/page/ce.html
Operate Frequency:
2.4G: EU/2400-2483.5MHz (CH1-CH13)
EIRP Power (Max.):
2.4GHz: 19.93dBm
Software Version: V1.0.1.11
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This
means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
Loading ...