Loading ...
Loading ...
Loading ...
Emergencies
–
P
u
l
l the rear light unit backward (››› Fig. 98
2
) to remove the light from its housing.
Removing the bulb holder
Fig. 99 Light connector at the rear of the rear
light
u
nit
.
Fig. 100 Retaining screws on reverse side of
r
e
ar light
unit.
–
Di
s
c
onnect the light connector
A
››› Fig. 99 b
y moving its side levers (arrows)
and p
u
lling the connector outwards.
–
Place the light on a level, horizontal surface
on top of a soft cloth so as not to scratch
the outer glass.
–
Unscrew the four retaining screws from the
bulb holder anti-clockwise using a screw-
driver or a Torx 20 key (T20) from the vehi-
cle tool kit ››› Fig. 100. Take care not to lose
the bulb holder retaining screws.
Changing bulbs
Fig. 101 Position of the bulbs in the bulb
ho
l
der
The bulbs are secured with a bayonet fasten-
er
.
The t
able below gives an overview of the
bulb positions.
–
Lightly press the defective bulb into the
bulb holder, then turn it anti-clockwise and
remove it.
–
Fit the new bulb, pressing it into the bulb
holder and turn it clockwise as far as it will
go.
–
Use a cloth to remove any fingerprints from
the glass part of the bulb.
–
Check that the new bulb works properly.
–
Replace the bulb holder.
–
Screw in the bulb holder using the four
screws, turning them clockwise.
Position of the bulbs
››› Fig. 101 Bulb function
A
Turn signals: PY21W NA LL
B
Side lights-brake lights: P21/5W
C
Side lights: P21/5W
Note
Check the condition of the seal. If damaged, a
repl
acement can be acquired from an Official
Service.
88
Loading ...
Loading ...
Loading ...