Seat Toledo 2015 Car

OWNER'S MANUAL - Page 102

For TOLEDO 2015.

PDF File Manual, 248 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
Operation
Check the oil level!
St
op the
v
ehicle, switch off the engine and
check the engine oil level page 207
If the bonnet remains open for more than 30
seconds, the warning lamp switches off. If
the engine oil is not refilled, the warning
lamp illuminates again after 100 km (62
miles).
The control lamp flashes yellow (oil level
sensor faulty)
The informative display indicates:
Oil sensor. Workshop!
If the engine oil level sensor is faulty, The
warning lamp flashes various times after
the ignition is switched on and an audible
warning is given.
Go to a technical service.
Coolant level and temperature
If the warning lamp (b
lue) i
s
lit up, the en-
gine has not yet reached its operating tem-
perature
1)
. Avoid high engine speeds, hard
acceleration and subjecting the engine to
high loads.
If the warning lamp (red) is lit up or flash-
ing, the coolant temperature is too high or its
level is too low.
The informative display indicates:
Check coolant! Instruction Man-
ual!
Stop the vehicle, switch off the engine, check
the coolant level page 208 and refill if
necessary page 209.
If the coolant is situated in the prescribed
area, the high temperature may be due to a
fault in the cooling system fan. Check the ra-
diator fan fuse and replace it if necessary
page 43.
If the warning lamp (red) remains lit up,
despite both the coolant level and the radia-
tor fan fuse being in correct condition,
stop the vehicle!
Go to a technical service.
WARNING
Take c
are when opening the coolant reser-
voir. When the engine is warm or hot, the
system is pressurised – Danger of burns!
Wait for the engine to cool before opening
the cover.
Do not touc
h the fan. The fan can switch on
automatically regardless of whether the igni-
tion is switched on.
Power steering
If the warning lamp is illuminated, there is
a fau
lt in the power steering.
The power steering system functions with re-
duced power steering effect.
Go to a technical service.
Stability system (ESC)
If the control lamp fl
a
she
s, the ESC is
working.
If the warning lamp illuminates on igni-
tion, the ESC system may have switched off
due to technical reasons. Turn off the ignition
and turn it on again. Upon switching on the
ignition again, if the warning lamp has
switched off, this means the ESC is function-
ing correctly again.
If the warning lamp is illuminated there is
a fault in the ESC.
The informative display indicates:
1)
This does not apply to vehicles equipped with an
informativ
e display.
100
Loading ...
Loading ...
Loading ...