Loading ...
Loading ...
Loading ...
5 5
MAINTENANCE
EN GLI SH
Replacing th e Door
1
Firmly grasp both sides of the door at the top.
2
With the door at the same angle as the removal
position, seat the indentation of the hinge arms
into the bottom edge of the hinge slots. The
notch in the hinge arms must be fully seated into
the bottom edge of the slots.
Hinge arm
Indentation
Bottom
edge of slot
3
Open the door fully. If the door will not open fully,
the indentation is not seated correctly in the
bottom edge of the slots.
4
Lock the hinge locks, rotating them back toward
the slots in the oven frame until they lock.
Hinge arm
Hinge lock
5
Close the oven door.
Remov ing th e Draw er
CA U T I O N
D isconnect the electrical power to the range at
the main fuse or circuit breaker panel. Failure to
do so can result in severe personal inj ury, death,
or electrical shock.
Most cleaning can be done with the drawer in place;
however, the drawer may be removed if further
cleaning is needed. U se warm water to thoroughly
clean.
1
Fully open the drawer.
2
Locate the glide lever on each side of the
drawer. Push down on the left glide lever and
pull up on the right glide lever.
Push down with nger Pull up with nger
Lever Lever
3
Pull the drawer away from the range.
Replacing th e Draw er
1
Pull the bearing glides to the front of the chassis
glide.
2
Align the glide on each side of the drawer with
the glide slots on the range.
3
Push the drawer into the range until levers click
(approxi mately 2 inch).
4
Pull the drawer open again to seat bearing glides
into position.
Door Care I nstructions
Most oven doors contain glass that can break.
CA U T I O N
•
D o not close the oven door until all the oven
racks are fully in place.
•
D o not hit the glass with pots, pans, or any
other obj ect.
•
Scratching, hitting, j arring, or stressing the
glass may weaken its structure causing an
increased risk of breakage at a later time.
Loading ...
Loading ...
Loading ...