Loading ...
Loading ...
Loading ...
16
INSTALLATION
W A RN I N G
•
A llow 2 to 3 ft ( 61. 0 cm to 9 1. 4 cm) of slack
in th e line so th at th e range can be mov ed if
serv icing is ev er necessary.
•
T h e pow er supply cord and plug sh ould
not be modified. I f it w ill not fit th e outlet,
h av e a proper outlet I nstalled by a q ualified
electrician.
•
U sing an ex tension cord to connect th e
pow er is proh ibited. Connect th e pow er
cord and plug directly.
•
Electrical ground is req uired on th is
appliance.
•
Make sure th at th e pow er cord is not
pinch ed by th e range or h eav y obj ects.
Failure to do so can result in serious burns or
electrical shock.
Specified pow er- supply- cord kit rating
Range rating, watts
Specified
rating of
power
supply-
cord kit,
amperes
D iameter (inches)
of Range
connection
Opening
1 20 / 240
volts
3-wire
1 20 / 20 8
volts
3-wire
Power
cord
Conduit
8 ,7 50 -
1 6 ,50 0
1 6 ,50 1 -
22,50 0
7 ,8 0 1 -
1 2,50 0
1 2,50 1 -
1 8 ,50 0
40 or 50 A
50
1
3
/
8
"
1
3
/
4
"
1
1
/
8
"
1
3
/
8
"
3, 4 - Wire electrical wall Receptacle
4 W ire receptacle ( 14- 5 0 R)
3 W ire receptacle ( 10 - 5 0 R)
Connecting th e Pow er Cord
The rear access cover must be removed. Loosen the
two screws with a screwdriver. The terminal block will
then be accessible.
Access cover
U se the cord/ conduit connection plate to install the
power cord or conduit. Leave the connection plate
as installed for power cord installations. Remove the
connection plate for conduit installations and use the
smaller 1
1
/
8
in. (2.8 cm) conduit hole instead of the
1
3
/
8
in. (3.5 cm) power cord hole.
Remove the conduit connection plate
1
1
/
8
"
(2.8 cm) Conduit
1
3
/
8
"
(3.5 cm) Cord
For power cord installations, hook the strain relief
over the 1
3
/
8
in. (3.5 cm) power cord hole located
below the rear of the oven. Insert the power cord
through the strain relief and tighten it.
Conduit
connection
plate
Power cord
Assembling power cord strain relief at the 1
3
/
8
" opening
For conduit installations, insert the conduit strain
relief in the 1
1
/
8
in. (2.8 cm) conduit hole. Then install
the conduit through the body of the strain relief and
fasten the strain relief with its ring.
Cord/
Conduit
connection
plate
Conduit
Ring
Body
Assembling conduit cord strain relief at the 1
1
/
8
" opening
Loading ...
Loading ...
Loading ...