Loading ...
Loading ...
Loading ...
9
Residual heat indicator
The cooktop is equipped with a residual heat indicator
for each element. It shows you which elements are still
hot. Avoid touching the indicated elements.
If an • is shown on the display, the element is still hot.
You could use it, for example, to keep a small quantity of
food warm or to melt a chocolate coating. As the element
continues to cool, the display changes to œ. The display
goes out once the element has cooled sufficiently.
The residual heat indicator will automatically come on
after a power failure. The display lights up for
approximately 30 minutes.
Operation
Main power switch
Use the main switch to turn on the electronic circuitry for
the control panel. The cooktop is now ready to use.
Turning the cooktop on
Touch the On/Off touch key. An acoustic signal will
sound. The __ indicator located on top of the On/Off
touch key and the symbols for the cooking zones light
up. ‹.‹ lights up next to the cooking zones. The cooktop
is ready to use.
Turning the cooktop off
Touch the On/Off touch key. The __ indicator goes out.
The cooktop is switched off. The residual heat indicators
will remain on until the elements have cooled off
sufficiently.
Notes
▯ The cooktop switches off automatically when all the
elements have been switched off for more than
20 seconds.
The residual heat indicator remains lit until the
elements have cooled down sufficiently. •/œ is
displayed next to the corresponding element symbol.
▯ The settings will be stored for 4 seconds after turning
off the cooktop. If you turn the cooktop back on during
that time the cooktop will continue with those settings.
Setting the cooktop
This section will show you how to set the elements. The
table contains details on the heat settings for a variety of
dishes.
Setting the element
Select the desired heat level using the number keys
1 to 9.
Heat level 1 = minimum power
Heat level 9 = maximum power
Each heat setting has an intermediate level. This level is
indicated by .5 in the element display and is set by
touching the Ú symbols between the number keys.
ò
Triple element The element has to be selected.
▯ Add middle heating ring: Touch the Additional Heating key. The ð indicator turns on.
▯ Add outer heating ring: Touch the Additional Heating key again. The ò indicator turns
on.
▯ Deactivate: Touch the Additional Heating key again. The ò indicator turns off. The inner
heating ring remains on.
à
Bridge element The bridge element combines two individual heating elements into one long griddle zone.
This configuration is ideal for griddles and large pans.
Note: Do not use cookware larger than 17" x 10" (432 x 254 mm).
One of the two elements that belong to the bridge element has to be selected.
▯ Activate: Touch the Bridge Join/Split key. The à indicator appears; ‹ appears in both
heating element displays. Set the desired heat setting. ~ "Setting the cooktop"
If a heat level was set on one of the elements before, this heat level will be used for the
bridge element. If two different heat levels were set on the two elements before, the bridge
element will use heat level ‹.
▯ Change heat level: Select one of the two elements that belong to the bridge element and
set the new heat level.
▯ Deactivate: Touch the Bridge Join/Split key. ‹ appears in both displays. The front heating
element remains selected. Setting the heat level to ‹ does not split the bridge element.
Element Turning on and off
Loading ...
Loading ...
Loading ...