Loading ...
Loading ...
Loading ...
16
Count-up Timer
The count-up timer function displays the time that has
elapsed since activation.
This functions independently from the cooking zones and
from other settings. This function does not automatically
switch off a cooking zone.
Activating
Touch the Count Up Timer key. The
‹‹ symbol and the
V indicator light up in the timer display.
The time begins to count up.
Deactivating
Touching the Count Up Timer key turns off the
stopwatch function. The timer displays remain lit.
If you touch the Count Up Timer key again, the displays
go out.
The function is deactivated.
Keep Warm function
This function is suitable for melting chocolate or butter
and for keeping food warm.
Activating
1.
Select the required element.
2.
Touch the Keep Warm key.
The –© indicator lights up.
The function is activated.
Deactivating
1.
Select an element.
2.
Touch the Keep Warm key.
The –© display goes out. The element switches itself
off and the residual heat indicator appears.
The function is deactivated.
Panel Lock
You can use the panel lock to prevent children from
accidentally turning the appliance on.
Activating and deactivating the panel lock
The cooktop must be turned off.
To activate:
1.
Switch on the cooktop using the main switch.
2.
Touch the Panel Lock key for approx. 4 seconds.
The D indicator lights up for 10 seconds.
The cooktop is locked.
To deactivate:
1.
Switch on the cooktop using the main switch.
2.
Touch the Panel Lock key for approx. 4 seconds.
The lock is released.
Automatic panel lock
With this function, the panel lock is automatically
activated whenever you turn off the cooktop.
Turning on and off
See "Basic settings" section.
Wipe protection
Cleaning the control panel while the cooktop is on may
change the settings. In order to avoid this the cooktop
has a wipe protection function.
To activate:
Touch the Panel Lock key. An acoustic signal sounds.
The
> indicator lights up. The control panel is locked for
35 seconds. You can now wipe over the surface of the
control panel without altering any settings.
To deactivate:
The control panel will be unlocked once 35 seconds
have elapsed. To release the function early, touch the
Panel Lock key.
Notes
▯ An audible signal sounds 30 seconds after activation.
This indicates that the function is about to finish.
▯ The wipe protection function does not lock the main
switch. The cooktop can be switched off at any time.
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating. ”‰ and the residual heat
indicator •/œ flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
Loading ...
Loading ...
Loading ...