Loading ...
Loading ...
Loading ...
52 English
Maintaining your appliance
Maintaining your appliance
Removing and re-installing the warming drawer
CAUTION
Turn the power OFF before removing the warming drawer.
How to remove the warming drawer
1. Pull out the drawer until it stops.
2. Locate the locking clips near the back of each full-extension roller guide rail.
Using two hands, push down on the left clip and lift up on the right clip to
release the clips. Pull the drawer the rest of the way out.
Lever
Lever
Push down on the left guide
Pull up on the right guide
3. Pull the warming drawer away from the range.
How to re-install the warming drawer
Right roller guide rail
1. Position the ends of the full-extension
roller guide rails in the side rails of the
drawer opening.
2. Push in the drawer to close it and snap
the locking clips into place.
Changing the oven light
The oven light is a standard 40-watt appliance bulb. It will come on when the oven
door is open. When the oven door is closed, press the pad to turn it on or
off. It will not work during a self-cleaning cycle.
Remove
Glass bulb cover Bulb
Replace
1. Make sure the oven and the bulb are
cool.
2. Unplug the range or disconnect the
power.
3. Turn the glass bulb cover in the back of
the oven counterclockwise to remove.
4. Turn the bulb counterclockwise to
remove it from its socket.
5. Insert a new 40 watt appliance bulb,
and then turn it clockwise to tighten.
Re-install the bulb cover by turning
clockwise.
6. Plug in the range or reconnect the
power.
CAUTION
Before changing your oven light bulb, disconnect the electrical power to the range
at the main fuse or circuit breaker panel. Make sure the oven and the bulb are cool.
NE58K9560WS_AA_AC_DG68-00722A-07_EN.indd 52 2019-01-21 11:26:37
Loading ...
Loading ...
Loading ...