Loading ...
Loading ...
3
Charging Position (far to the right) and charge for 2 hours. The indicator light flashes GREEN and will
go to a steady GREEN when the charging is complete.
1.3 While the unit is charging, take time to read the Instruction Manual for Safety Notes and proper use
of the unit.
1.4 For most of your windows, the cord supplied will meet your demands. Should you be cleaning the
outside of the window, you must use the Safety Pod. Read the instructions on Safety Pod use in
your Instruction Manual.
1.5 You MUST place the large cleaning pad on the front floating plate, making sure to cover the whole
plate. The smaller cleaning pad to be attached to the rear of the unit in the space provided.
1.6 Make sure the button on the bottom of the WINBOT is turned ON.
1.7 Just prior to placing the unit onto the window, take the glass cleaning solution bottle and spray ONLY
the FRONT pad. The pad should just be damp.
3. USE OF PRODUCT
1.1 Grasping the unit by the handle, place the unit on the window which is most convenient to you, BUT
making sure it is at least 10cm (4‘’)up and in from the corner of the window frame.
1.2 While still having a hold on the handle, move the switch from the OFF position (far left) to the ON
position (Center) and you will hear a slight noise. This is the vacuum motor creating suction to hold
the unit to the window. When the indicator light turns BLUE, the unit has attached itself to the
window and you can now let go of the handle.
1.3 After ensuring the WINBOT is correctly placed on the glass, press “Start/Pause” (Icon) button of the
Remote Control momentarily or directly press the “Start/Pause” (Icon) button on the Main Unit, then
the product will use automatic cleaning mode for cleaning the window and when finished cleaning it
will return to the start position.
1.4 If you want the product to pause during the cleaning, press “Start/Pause” (Icon) button on the Remote
Control momentarily or directly press “Start/Pause” (Icon) button on the Main Unit, then the product
will pause working and go on standby.
1.5 When the unit is done cleaning and has returned to the START position, grasp the handle of the unit
and move the switch under the handle to the OFF position - left, and while still grasping the unit, insert
finger into the Air Release trigger and Pulling up on it, remove the unit from the window.
Loading ...
Loading ...
Loading ...