Loading ...
Loading ...
Loading ...
10
When electrical connection fails or WINBOT finishes cleaning, please remove it from the window.
Grasping the handle, turn the unit OFF and use the Air Release Button or hold onto the handle for 30
seconds or more.
Because the vacuum generated on the bottom of the unit is rather strong, do not place close to body or
hand as it will suck the skin into the orifice and unit would have to be turned OFF to remove the unit from
the body part.
Please check the cupule on the bottom of the unit before each use to make sure they are not damaged
and would prevent good suction to the window.
2.5 About Children Safety
The product cannot be used by children or mentally disabled people.
The product should be stored out of the reach of children.
The product is NOT a toy for children to play with.
Keep all packing material out of the reach of children and dispose of it immediately.
2.6 Product Disposal
As soon as the unit is unpacked and you have verified that all components have been accounted for, you
should dispose of the packaging material right away to keep the children from playing with it.
Please recycle all packing material.
2.7 Replacement of WINBOT’s Battery and Disposal of Used Batteries (Picture)
Replace the Lithium battery with only genuine ECOVACS replacement battery. By calling our service
number and with the Model number and the numbers from the UPC label on the bottom of the unit, you
can order a replacement Lithium battery.
Should the Lithium battery need replaced, dispose of the old battery in accordance with your local laws.
2.8 Cases of Product Problems (picture)
Should there be a problem with your unit, please consult the questions and answers at the end of the
Instruction Manual. Should you not find the necessary help in the Question and Answer section, please
call our service number for further technical assistance.
Please contact our after-sales service department or the professional maintenance agency developed by
our company so that the professional maintenance personnel can provide after-sales service and
maintenance.
3. Preparation Before Use
3.1 Charging WINBOT’s Backup Battery
Before charging, please firstly turn on the button at the bottom of the WINBOT. (“ ” OFF
“ ” ON. The default state is “ ”) Otherwise, WINBOT can NOT be charged or working.
After plugging the adapter into your receptacle, connect the supply cord to the WINBOT so the Back Up
battery can be fully charged. The Battery MUST be fully charged before the unit will work when placed on
the WINBOT.
Loading ...
Loading ...
Loading ...