Loading ...
Loading ...
Loading ...
Emergencies
Number plate light
–
Insert the flat part of a screwdriver into the
speci
al slot and remove the bulb.
–
Remove the bulb holder, by turning it until
it is free.
–
Change the bulb.
–
Replace the bulb holder, by turning it until
it fits fully.
–
Fit the light into the space and press until
you hear a “click”.
Additional brake light*
Given the difficulty involved in the replace-
ment
of
thi
s light it should be done by Tech-
nical Services.
Interior light and front reading lights
Fig. 109 Front reading light.
To remove the glass
–
Insert a fine screwdriver between the cas-
in
g and the gl
a
ss ››› Fig. 109.
–
Carefully remove the glass, levering it to
avoid possible damage.
To replace the bulbs
–
Pull the bulbs outwards.
–
To remove the central bulb, hold and press
to one side.
Assembly
–
Proceed in the reverse order, pressing gen-
tly on the outer edge of the side light.
–
First fit the glass with the fastening tabs
over the frame of the switch. Next press the
front part until the two long tabs click on
the support.
Luggage compartment light*
Fig. 110 Boot light.
Fig. 111 Boot light.
–
Extract the bulb by pressing on its inside
edg
e -
arr
ow- using the flat side of a screw-
driver ››› Fig. 110.
90
Loading ...
Loading ...
Loading ...