Loading ...
Loading ...
Loading ...
Fuses and bulbs
Remove the cover
–
Raise the bonnet.
–
Move the loop ›
›
›
Fig. 91
1
in the direction
of
the arr
o
w and remove the cover.
Changing the dipped/main beam headlight
–
Remove connector ››› Fig. 92
3
from the
b
u
l
b.
–
Unclip the retainer spring ››› Fig. 92
2
pressing inwards to the right.
–
Extract the bulb and fit the replacement so
th
at
the lug on the b
ase fits into the recess
on the reflector.
–
Fit the connector.
–
Fit the cover and close the strap. Make sure
that the gasket sits well on the casing cover
during the operation.
–
Check whether the new bulb is working.
Changing the side light
–
Extract the bulb holder ››› Fig. 92
4
out-
w
ar
d
s.
–
Remove the bulb by pulling it out and fit-
ting the new one.
–
Installation involves all of the above steps
in reverse sequence.
–
Fit the cover and close the strap. Make sure
that the gasket sits well on the casing cover
during the operation.
–
Check whether the new bulb is working.
Double headlight bulb change
Position of the bulbs
Fig. 93 Double headlight.
Side lights
M
ain be
am he
adlights
Dipped beam headlights
Turn signal
DRL (LED day light)
A
B
C
D
E
Side light and main beam
Fig. 94 Double headlight.
Fig. 95 Side light and main beam headlights.
Remove the cover
–
Raise the bonnet.
–
Move the loop
1
in the direction of the ar-
r
o
w and r
emove the cover ››› Fig. 94.
»
85
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...