Loading ...
Loading ...
Loading ...
Emergencies
–
R
emo
v
e the 3 bolts ››› Fig. 102
2
to re-
mo
v
e the f
og light.
–
Remove the metal clip situated on the up-
per part of the fog light by pulling towards
the exterior of the vehicle ››› Fig. 102
3
.
FR version fog-light bulb
Fig. 103 Fog light: access to the connector
and t
o the light
b
ulb holder.
–
Remove the 4 bolts
A
›
›
› Fig. 103
from the
inside of the wheel housing and the 2 bot-
tom bolts
B
›
›
› Fig. 103
from the bumper
with a screwdriver.
–
Pull the bumper to release it from its an-
chorages to access the connector and the
light bulb holder.
Note
Due to the difficulty of accessing fog light
bul
bs, have them replaced at a Technical
Service or specialised workshop.
Remove the bulb holder
Fig. 104 Front fog light.
–
Remove connector ›
›
›
Fig. 104
1
from the
b
u
l
b.
–
Turn the bulb holder ››› Fig. 104
2
to the
l
ef
t
and pull.
–
Remove the bulb by pressing on the bulb
holder and turning it counter-clockwise at
the same time.
–
Installation involves all of the above steps
in reverse sequence.
–
Check that the bulb works properly.
Changing the tail light bulbs
Summary of LED tail lights
LED
●
Brake lights
●
Side lights
Bul
bs
●
Retro fog light
●
Reverse lights
●
Turn signal
Access to tail lights
Fig. 105 Access to tail lights.
●
Open the rear lid.
●
Turn the bolt in the direction of the arrow,
b
y
h
and or with a screwdriver ››› Fig. 105.
88
Loading ...
Loading ...
Loading ...