Loading ...
Loading ...
Loading ...
Fuses and bulbs
●
R
emo
v
e the tail light, by pulling it out-
wards.
Changing the tail light bulbs
Fig. 106 Changing the tail light bulbs
Fig. 107 Changing the tail light bulbs
●
R
emo
v
e the connector from housing
A
››› Fig. 105.
●
Remove the bulb holder, separating it from
the c
a
s
ing. To do this, press tabs
B
in the
dir
ection of
the arr
ows ››› Fig. 106.
●
When the bulb holder has been removed,
press in the direction of the arrow
1
and at
the s
ame time, t
urn in the dir
ection of the ar-
row
2
›
›› Fig. 107
Ch
an
ging bulbs. LED lamps
Carry out the same operations as in lights fit-
ted with bulbs.
If necessary, remove the socket, as if it were
a bulb.
If the brake light and/or side light with LEDs
have to be replaced, the tail light must be re-
placed.
Changing the side and interior
bulbs
Turn signals
Fig. 108 Turn signals.
–
Press the turn signal to the left or to the
right
t
o r
emove the bulb.
–
Remove the bulb holder from the turn sig-
nal.
–
Remove the failed bulb and replace with a
new bulb.
–
Insert the bulb holder in the turn signal
guide until it clicks into place.
–
First fit the turn signal in the opening in the
chassis, fastening the tabs
1
›
›
› Fig. 108
,
and then fit in the bulb as shown by the ar-
row
2
›
›
› Fig. 108
.
89
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...