Loading ...
Loading ...
Loading ...
Seats and head restraints
intensity, the upper LED goes out, the sys-
t
em i
s
deactivated for 2 minutes and is
then reactivated at low intensity (the lower
LED remains on permanently).
–
Press the switch again to set the heating to
minimum force. (The lower LED lights up).
–
To disconnect the heating, press the switch
again.
CAUTION
To avoid damaging the heating elements,
ple
ase do not kneel on the seat or apply
sharp pressure at a single point to the seat
cushion and backrest.
Note
The seats are only heated electrically when
the engine is
running.
Folding down the back seat
Fig. 135 Folding up the rear seat cushion.
Fig. 136 Button for unlocking the rear back-
r
e
s
t.
Folding seat down
–
Remove the head restraint ›
›
›
page 128.
–
Pull the front edge of the seat cushion
››› Fig. 135
1
upwards in the direction of
the arr
o
w
.
–
Lift the cushion
2
forwards in the direc-
tion of
the arr
o
w.
–
Pull the release button ››› Fig. 136 in the di-
rection of the arrow and fold the backrest
forwards.
–
Insert the head restraints in the spaces on
the rear of the seat cushion which are visi-
ble when the seat cushion is lowered.
Folding seat forward
–
Remove the head restraints from the
spaces in the seat cushion.
–
Lift the backrest, and before securing it, re-
place the head restraints in the seat cush-
ion, and then click the seat correctly onto
the locking rails.
–
Once the backrest is locked, pull on the
central seat belt or directly on the backrest
to check that the backrest has properly en-
gaged in position.
–
Check that the position lever is in neutral
position.
–
Lower the cushion and push it backwards
below the seat belt buckles.
–
Press the front part of the cushion down-
wards.
On split rear seats*, the backrest and cush-
ion can be lowered and raised respectively in
two sections.
»
129
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...