Loading ...
Loading ...
Loading ...
Playing back video
TQBS0146
45
Picture Settings
Switch “Set 1”, “Set 2” or “Standard” by using
[2, 1].
• You can register desired settings to “Set 1” and
“Set 2”. Settings for BD Video playback and
settings for the playback of other types of media
are registered separately.
(The default settings for “Set 1”/ “Set 2” are the
same as the settings for “Standard”.)
• You cannot change the “Standard” settings.
Picture Type
Select the picture quality mode during play.
Sharpness Adjustment
Noise Reduction
Luminance/Colour Adjustment
Adjust the contrast, brightness, tone curve
(white/black) colour saturation and hue.
Bandwidth Limitation
Adjusts the bandwidth limitations.
Dynamic Range Adjustment
Adjusts the brightness of the entire screen
when HDR (High Dynamic Range) video is
output.
Dynamic Range Conversion Adjustment
When this unit is connected to a TV that does
not support HDR (High Dynamic Range) input,
HDR video is output converting to a SDR
(Standard Dynamic Range) video signal. If you
set a smaller value, their contrast will be
reproduced more faithfully, but the entire
screen will appear darker. To increase the
brightness, set a larger value.
Picture Settings
Picture Type
Sharpness Adjustment
Noise Reduction
Luminance/Colour Adjustment
Bandwidth Limitation
Normal
Dynamic Range Conversion Adjustment
Reset to Default Picture Settings
24p / 25p Conversion Off
Progressive Auto
Set 1
t
ure
T
yp
e
a
rpness Ad
j
ustmen
t
se
R
educ
ti
on
m
inance
/C
olour Adjustmen
t
ndw
idth
Limit
ation
Norma
a
a
Norma
a
a
Norma
a
Norma
l
l
nam
ic Ra
nge C
onversion
Adjus
tment
s
et to Default Picture Settings
p
/ 25p Conversion
O
ff
og
ress
i
v
e
A
uto
Set
1
Set 1
During BD-Video playback,
these icons switch to the
ones for BD Video content.
24p / 25p Conversion
Plays back videos with film-like motion.
• This function is available on the following
conditions:
- “Video Format” set to “Automatic”, “4K”,
“1080i”
§
or “1080p”
§
(> 76)
§
Only for 24p Conversion
- Connect 24p/25p compatible TV.
• Noise may appear on the image when you
switch the setting.
Progressive
Select the method of conversion for
progressive output to suit the type of content
being played.
•Auto
Automatically detects the film and video
content, and appropriately converts it.
•Video
Select this setting when the content is
distorted if “Auto” is selected.
•Film
Select this if the edges of the film content
appear jagged or rough when “Auto” is
selected. However, if the video content is
distorted, then select “Auto”.
Reset to Default Picture Settings
Restores the default settings of the Picture
Settings menu.
DMR-UBT1GL_eng.book 45 ページ ２０１７年７月２５日 火曜日 午後１時４５分
Loading ...
Loading ...
Loading ...