Loading ...
Loading ...
Loading ...
31
You must DISCONNECT the appliance
from the electricity supply, before you can
carry out any cleaning or maintenance
work.
The water we use normally contains lime.
It is a good idea to periodically use a
water softening powder in the machine.
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
Do not use alcohol, solvents or
chemical products.
Do this separately from any laundry
washing, and according to the softening
powder manufacturer's instructions.
This will help to prevent the formation of
lime deposits.
Leave the door open for a while. This
helps to prevent mould and stagnant
smells forming inside the appliance.
Keeping the door open after a wash will
also help to preserve the door seal.
With the use of low temperature washes
it is possible to get a build up of residues
inside the drum.
We recommend to use “Tub Clean”
program to clean the drum regularly to
remove any residue.
The drum should be empty of laundry.
Press Start/Pause to start the program.
Select the “Tub Clean” program.
To run a maintenance wash:
WARNING!
CAUTION!
8.1 External Cleaning
8.2 Descaling
8.3 After Each Wash
8.4 Maintenance Wash With
“Tub Clean” Program
8.5 Cleaning The Detergent
Dispenser And The Autodose
Tanks
8. CARE AND CLEANING
Before cleaning, make sure that
the all compartments are empty.
Cleaning procedure is also
suggested when brand or type
of detergent, fabric softener or
additives are changed inside the
tanks.
To prevent possible deposits of dried
detergent, clotted fabric softener,
formation of mould in the detergent
dispenser and/or clotted liquid additives
in the AutoDose tanks, once in a
while carry out the following cleaning
procedure:
1. Open the detergent dispenser. Press
the catch as indicated in the picture
and pull the detergent dispenser out.
2. Remove the insert for the softener
and, if inserted, the special container
for liquid detergent.
Loading ...
Loading ...
Loading ...