Loading ...
Loading ...
Loading ...
16 www.electrolux.com
Stain Touchpad
Extra Rinse Touchpad
Press this touchpad to add the stain
phase to a program. The indicator of
this option comes on.
Use this function for laundry with hard
to remove stains.
You have 2 choices for adding stain
remover:
Detergent
for
Prewash
phase.
This option is recommended for people
who are allergic to detergents, and in
areas where the water is very soft. Use
this option to add two rinse phases to
a program.
Select this option if you wish your
laundry to be pre-washed before the
main wash.
Use this option for heavy soil, especially
if containing sand, dust, mud and other
solid particles.
This option increases the program
duration.
You have 2 options for adding
prewash detergent:
Select this option to add approximately
30 minutes of tumbling in vapour during
the wash cycle. Vapour helps open
fabric bers up to allow laundry additives
to release tough stains. The indicator of
this option will be on.
• Vapour may not necessarily be visible
inside the drum during a vapour wash
cycle. Vapour is created below the
drum and allowed to naturally rise
into the clothes.
• Vapour may not be present during the
entire vapour wash cycle.
• Vapour function is more effective with
half load.
1. If AutoDose Detergent is Off, put
the detergent for Main wash phase
into the compartment “Manual”
(for powder) or
I (for liquid)
and pour detergent for Prewash
phase directly into the drum.
2. If AutoDose Detergent is On,
detergent is dispensed from the
AutoDose compartment during
Prewash phase. So, you do not
need to add more detergent.
1. If AutoDose Detergent is Off,
when you set this function, put the
stain remover into the compartment
“Manual”
(powder) or I
(liquid) together with detergent
(powder with powder / liquid with
liquid).
2. If AutoDose Detergent is On,
The detergent is dispensed from
the AutoDose compartment. You
can put stain remover into the
compartment “Manual”
(powder)
or
I (liquid).
This function increases the
program duration.
If you press AutoDose
button
while Stain option is active,
AutoDose function is switched
off, but Stain option still remains
active in manual mode.
Stain option can be combined
with temperature 40 to 90 °C
only.
Prewash Touchpad
Vapour (
) Touchpad
Loading ...
Loading ...
Loading ...