EWF1041ZDWA
WASHING MACHINE USER MANUAL
WI-FI CONNECTIVITY SETUP
2
48
2 www.electrolux.com
Visit our website to:
Warning / Caution-Safety information.
General information and tips
Environmental information.
Subject to change without notice.
CUSTOMER CARE AND SERVICE
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings
with it decades of professional experience and innovation. Ingenious and stylish, it has
been designed with you in mind. So whenever you use it, you can be safe in the
knowledge that you’ll get great results every time. Welcome to Electrolux.
We recommend the use of original spare parts.When contacting Service, ensure that
you have the following data available. The information can be found on the rating plate.
Model, PNC, Serial Number.
Adherence to the directions for use in this manual is extremely important for health and
safety. Failure to strictly adhere to the requirements in this manual may result in personal
injury, property damage and affect your ability to make a claim under the Electrolux
manufacturer’s warranty provided with your product. Products must be used, installed and
operated in accordance with this manual. You may not be able to claim on the Electrolux
manufacturer’s warranty in the event that your product fault is due to failure to adhere to
this manual.
IMPORTANT INFORMATION THAT MAY IMPACT YOUR
MANUFACTURER’S WARRANTY
WE’RE THINKING OF YOU
Get usage advice, brochures, trouble shooter, service information, buy accessories &
spare parts, online product registration : www.electrolux.com
3
Visit our website to:
Warning / Caution-Safety information.
General information and tips
Environmental information.
Subject to change without notice.
CUSTOMER CARE AND SERVICE
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings
with it decades of professional experience and innovation. Ingenious and stylish, it has
been designed with you in mind. So whenever you use it, you can be safe in the
knowledge that you’ll get great results every time. Welcome to Electrolux.
We recommend the use of original spare parts.When contacting Service, ensure that
you have the following data available. The information can be found on the rating plate.
Model, PNC, Serial Number.
Adherence to the directions for use in this manual is extremely important for health and
safety. Failure to strictly adhere to the requirements in this manual may result in personal
injury, property damage and affect your ability to make a claim under the Electrolux
manufacturer’s warranty provided with your product. Products must be used, installed and
operated in accordance with this manual. You may not be able to claim on the Electrolux
manufacturer’s warranty in the event that your product fault is due to failure to adhere to
this manual.
IMPORTANT INFORMATION THAT MAY IMPACT YOUR
MANUFACTURER’S WARRANTY
CONTENTS
1. SAFETY INFORMATION ........... 4
1.1 Conditions Of Use ..................... 4
1.2 Child Safety ............................... 5
1.3 General Safety .......................... 5
1.4 Installation ................................. 6
1.5 Use ............................................ 6
2. PRODUCT DESCRIPTION ............. 7
2.1 Parts .......................................... 7
2.2 Accessories ............................... 8
2.3 Load Sensor .............................. 9
2.4 The Autodose Technology
(Autodosing) ............................ 10
3. CONTROL PANEL ......................... 11
3.1 Control Panel Description ....... 11
3.2 Program Chart ......................... 12
3.3 Program Options Compatibility 14
3.4 Options .................................... 14
3.5 Settings ................................... 17
3.6 Start/Pause (
) and
Add Clothes ( ) Touchpad ... 18
4. BEFORE FIRST USE .................... 18
5. DAILY USE .................................... 19
5.1 Loading The Laundry .............. 19
5.2 Detergent Dispenser With
Autodose Tanks And Manual
Compartments ......................... 19
5.3 Options Setting ........................ 25
5.4 Starting A Cycle (
) .............. 26
5.5 Interruption Of A Program ....... 26
5.6 Changing A Program ............... 26
5.7 Changing The Options ............ 26
5.8 Opening The Door ................... 26
5.9 At The End Of The Program .... 27
5.10 When The Washing Program
Is Completed, But There Is
Water In The Drum .................. 27
5.11 AUTO Off Mode ..................... 27
6. WASHING HINTS .......................... 28
6.1 Sorting The Laundry ................ 28
6.2 Temperatures .......................... 28
6.3 Before Loading The Laundry ... 28
6.4 Maximum Loads ...................... 28
6.5 Removing Stains ..................... 28
6.6 Detergents Type And Quantity
Of Detergent ............................ 29
7. INTERNATIONAL WASH CODE
SYMBOLS .................................... 30
8. CARE AND CLEANING ................. 31
8.1 External Cleaning .................... 31
8.2 Descaling ................................ 31
8.3 After Each Wash ...................... 31
8.4 Maintenance Wash With “Tub
Clean” Program ....................... 31
8.5 Cleaning The Detergent
Dispenser And The Autodose
Tanks ....................................... 31
8.6 Cleaning The Pump ................. 33
8.7 Cleaning The Water Inlet Filter 35
8.8 Frost Precautions .................... 37
9. TROUBLESHOOTING .................. 38
9.1 Possible Failures ..................... 38
9.2 Emergency Door Opening ....... 41
10. TECHNICAL DATA ...................... 42
11. INSTALLATION ............................ 42
11.1 Unpacking .............................. 42
11.2 Positioning ............................. 44
11.3 Water Inlet ............................. 45
11.4 Water Drainage ..................... 45
11.5 Electrical Connection ............. 47
12. ENVIRONMENT CONCERNS .... 47
12.1 Packaging Materials .............. 47
12.2 Old Machine .......................... 47
12.3 Ecological Hints ..................... 47
13.
WI-FI CONNECTIVITY SETUP 48
13.1 Installing and conguring
“Electrolux Life” App. ............. 48
13.2
Remote Start ..................... 49
WARRANTY..................51
4 www.electrolux.com
In the interest of your safety and to ensure the correct
use, before installing and first using the appliance, read
this user manual carefully, including its hints and
warnings.
This appliance is intended to be used in household and
similar applications such as:
farm houses;
by clients in hotels, motels, and other residential type
environments;
To avoid unnecessary mistakes and accidents, it is
important to ensure that all people using the appliance
are thoroughly familiar with its operation and safety
features.
Save these instructions and make sure that they remain
with the appliance if it is moved or sold, so that everyone
using it through its life will be properly informed on
appliance use and safety.
●
bed and breakfast type environtments;
●
areas for communal use in blocks of flats or in
launderettes.
●
staff kitchen areas in shops, offices and other working
environtment;
●
●
WARNING! The appliance must not be supplied
through an external switching device, such as timer,
or connected to a circuit that is regularly switched on
and off by utility.
1. SAFETY INFORMATION
1.1 Conditions Of Use
5
In the interest of your safety and to ensure the correct
use, before installing and first using the appliance, read
this user manual carefully, including its hints and
warnings.
This appliance is intended to be used in household and
similar applications such as:
farm houses;
by clients in hotels, motels, and other residential type
environments;
To avoid unnecessary mistakes and accidents, it is
important to ensure that all people using the appliance
are thoroughly familiar with its operation and safety
features.
Save these instructions and make sure that they remain
with the appliance if it is moved or sold, so that everyone
using it through its life will be properly informed on
appliance use and safety.
●
bed and breakfast type environtments;
●
areas for communal use in blocks of flats or in
launderettes.
●
staff kitchen areas in shops, offices and other working
environtment;
●
●
WARNING! The appliance must not be supplied
through an external switching device, such as timer,
or connected to a circuit that is regularly switched on
and off by utility.
●
●
●
●
This washing machine is not intended for use by
young children or infirm persons without supervision.
Young children should be supervised to ensure that
they do not play with the appliance.
The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children - danger of
suffocation! Keep them out of children’s reach.
Keep all detergents in a safe place out of children’s
reach.
It is dangerous to alter the specifica-
tions or attempt to modify this product
in any way.
During high temperature wash
program the door glass may get hot.
Do not touch it!
Make sure that small pets do not
climb into the drum. To avoid this,
please check inside the drum before
using the appliance.
Any objects such as coins, safety
pins, nails, screws, stones or any
other hard, sharp material can cause
extensive damage and must not be
placed into the machine.
Only use manufacturer’s
recommended quantities of fabric
softener and detergent. Damage to
the fabric or appliance can occur if
you exceed the recommended
amount.
Wash small items such as socks,
laces, washable belts etc in a
washing bag or pillow case as it is
possible for such items to slip down
between the tub and the inner drum.
Do not use your washing machine to
wash articles with whalebones,
material without hems or torn
material.
Make sure that children or pets do not climb into the
drum.
This machine is provided with child safety lock option
( ) to prevent children playing with the control panel.
●
●
●
●
●
●
●
●
●
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
Always unplug the appliance and turn
off the water supply after use, clean
and maintenance.
●
●
1.2 Child Safety
1.3 General Safety
(see page 17)
6 www.electrolux.com
Never use the washing machine if
the power supply cable, the control
panel, the working surface or the
base are damaged so that the inside
of the washing machine is accessi-
ble.
This appliance is heavy. Care should
be taken when moving it.
When unpacking the appliance, check
that it is not damaged. If in doubt, do
not use it and contact the Service
Centre.
All packing and transit bolts must be
removed before use. Serious damage
can occur to the product and to
property if this is not adhered to. See
relevant section in the user manual.
Under no circumstances should you
attempt to repair the machine
yourself. Repairs carried out by
inexperienced persons may cause
injury or serious malfunctioning.
Contact your local Service Centre.
Always insist on genuine spare parts.
After having installed the appliance,
check that it is not standing on the
inlet and drain hose and the worktop
is not pressing the electrical supply
cable.
If the appliance is installed on a
carpeted floor, please adjust the feet
in order to allow air to circulate freely.
Always be sure, that there is no water
leakage from hoses and their
connections after the installation.
Any plumbing work required to install
this appliance should be carried out
by a qualified plumber.
Any electrical work required to install
this appliance should be carried out
by a qualified electrician.
Only wash fabrics which are
designed to be machine washed.
Follow the instructions on each
garment label.
Do not overload the appliance. See
the relevant section in the user
manual.
Before washing, ensure that all
pockets are empty and buttons and
zips are fastened. Avoid washing
frayed or torn articles and treat stains
such as paint, ink, rust, and grass
before washing.
Garments which have been in
contact with volatile petroleum
products should not be machine
washed. If volatile cleaning fluids are
used, care should be taken to ensure
that the fluid is removed from the
garment before placing in the
machine.
Never pull the power supply cable to
remove the plug from the socket;
always take hold of the plug itself.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
May cause electric shock! if the
machine is not connected to an
earthed/ground system. DO NOT
touch the wet clothes and metal
parts.
For safety reasons do not use
double adaptors, extension
cords and multi-plug adapters.
1.4 Installation 1.5 Use
7
Detergent/Softener
Dispenser
Cabinet
Front Panel
Door
Drain Pump Filter
Level Adjustment
Feet (Front)
Level Adjustment
Feet (Back)
Water Inlet Hose
Transit Bolts &
Hose Support
Transit Bolts &
Hose Support
Mains Cable
Water Drain Hose
Worktop
Control Panel
Transit Bolts
2.1 Parts
2. PRODUCT DESCRIPTION
(see page 19) (see page 11)
(see page 33)
(see page 45)
(see page 45)
8 www.electrolux.com
Drain Pump
Filter Door
Drain Pump
Filter
Detergent dispenser with AutoDose tanks and manual
compartments
Transit Bolt (when remove)
Transit bolts must be removed
before using the appliance.
Drain Pump Filter (when open)
Level Adjustment Feet
Drum Lifter
Stainless
Steel
Washing
Drum
Door (when open)
for more informations
For more
informations
ENGLISH 9
This machine has “Load Sensing Device”
which shows how much load you put in
the machine and maximum load
recommended for selected wash
program.
The weight shown on display is
an approximate weight only.
For correct operation of the load
sensor, activate the appliance
and set a wash program BEFORE
loading the laundry in the drum.
The display shows these
indicators when the door is
open.
(see page 19)
, see page 19
2.2 Accessories
Plastic Caps
To close the holes
on the rear side of
the cabinet after the
removal of the transit
bolts.
Plastic Hose Guide
To connect the drain hose
on the edge of a sink.
Spanner
To remove the transit
bolts. To adjust levelling
legs.
9
Drain Pump
Filter Door
Drain Pump
Filter
Detergent dispenser with AutoDose tanks and manual
compartments
Transit Bolt (when remove)
Transit bolts must be removed
before using the appliance.
Drain Pump Filter (when open)
Level Adjustment Feet
Drum Lifter
Stainless
Steel
Washing
Drum
Door (when open)
for more informations
For more
informations
ENGLISH 9
This machine has “Load Sensing Device”
which shows how much load you put in
the machine and maximum load
recommended for selected wash
program.
The weight shown on display is
an approximate weight only.
For correct operation of the load
sensor, activate the appliance
and set a wash program BEFORE
loading the laundry in the drum.
The display shows these
indicators when the door is
open.
2.3 Load Sensor
– The display will show “ ” when
max limit is reached for selected
program.
– On the display, the weight of the
laundry updates by 0.5 kg steps.
– The weight is a general indication that
changes with the type of the laundry.
– If you exceed the max weight limit of a
program, the symbol “
” will start
ashing if the load in the drum is more
than recommended load, even after
the door is closed.
10 www.electrolux.com
2.4 The Autodose Technology
(Autodosing)
Introduction
Using the right amount of detergent and fabric
softener not only improves the wash performance
of your machine it is also benecial for your clothes
and environment by avoiding excessive detergent
usage.
This appliance is equipped with an automatic
dosing system enabling the machine to
automatically dispense the right amount of
detergent and fabric softener for selected wash
cycle based on laundry weight.
When Either of Auto dose features are selected,
relevant symbols
or are shown on display.
If one or both options are not shown on the
display, detergent and softener should be added
manually.
• Cottons
• Mixed
• Bedding
• Energy Saver
• Sports
• Quick 15
• Daily 60
• Delicates
• Cottons
• Mixed
• Bedding
• Energy Saver
• Sports
• Quick 15
• Daily 60
• Wool
• Delicates
Auto dose detergent is available for
the following wash programs:
AutoDose Fabric Softener; Program
available are:
The appliance is pre-set by the factory to suit
most users habits.
When Auto dosing is disabled,
use manual detergent and fabric
softener compartments.
Note: Auto dose is not available
for some wash programs as some
garments require special detergents and
treatments.
For more informations, refer to
page 19 to page 25.
AutoDose detergent tank.
AutoDose fabric softener tank.
11
3. CONTROL PANEL
3.1 Control Panel Description
Delay End Icon
Temperature (“
” represents Cold
water)
Door Lock Icon
Program Duration / Delay End Time /
Alarm Code
Remote Icon (
Wi-Fi connection
indicator,
Remote connection
indicator.)
Add Clothes Icon
AutoDose Icon
Maximum Load Capacity of Selected
Program / Load Weight
Spin Speed
Extra Silent Icon, Rinse Hold Icon
Program Phase Indication Icon
Ultramix phase, Wash phase,
Rinse phase, Spin phase,
Vapour phase
A)
C)
D)
E)
F)
G)
H)
I)
J)
B)
1
2
3
4
5
7
8
6
9
Program Selector Knob
Display
Temperature Selection Touchpad
Spin Selection Touchpad
Remote Touchpad
16
Child Lock Option
AutoDose Softener Touchpad
Start/Pause and Add Clothes Touchpad
Delay End Touchpad
11
Stain Touchpad
12
Prewash Touchpad
13
On/Off Button
14
Vapour Touchpad
15
Save Favourite Program Option
10
Extra Rinse Touchpad
AutoDose Detergent Touchpad
Display
D
E
21 53 4 6
1314
15
12
16
79 811 10
C
B
A
F
G IH
J
12 www.electrolux.com
Program;
Temperature
range
1200
rpm
2 kg
1200
rpm
4 kg
––
Type of load and soil level Max.
Spin
Speed
Max. Load
(Dry Clothes)
Cold to 40°C
Cold to 40°C
Specially tested program for woollen
garments bearing the “Pure new woollen,
non-shrink, machine washable” label.
Delicates;
Wool ;
Favourite Recall you favourite program.
Delicate fabrics such as acrylics, viscose,
polyester items.
Woolmark Apparel Care - Blue
The wool wash cycle of this machine has been approved by
The Woolmark Company for the washing of wool garments
labelled as “hand wash” provided that the garments are
washed according to the instructions issued by the manufac-
turer of this washing machine. Follow the garment care label
for drying and other laundry instructions. M1361
The Woolmark symbol is a Certification mark in many
countries.
Program;
Temperature
range
Cold to 90°C
1400
rpm
10 kg
1200
rpm
4 kg
800
rpm
3 kg
1400
rpm
10 kg
1400
rpm
10 kg
1400
rpm
10 kg
1200
rpm
4 kg
800
rpm
1.5 kg
1400
rpm
5.5 kg
–1.5 kg
––
Type of load and soil level Max.
Spin
Speed
Max. Load
(Dry Clothes)
30°C
60°C
Vapour
Refresh
Lightly soiled synthetics or mixed fabrics.
This cycle removes odours and helps to
dewrinkle the laundry.
Cold to 60°C
Cold to 60°C
30°C to 60°C
Bedding; Special program for one synthetic blanket,
duvet, bedspread and so on.
Rinse + Spin To rinse and spin the laundry.
Spin
To spin the laundry and drain the water in
the drum.
Energy
Saver;
Cold and
40°C
1)
White and colourfast cotton. Set this
program to have a good washing results and
decrease the energy consumption. The time
of the washing program is extended.
Coloured cotton e.g. shirts, blouses, towels
and undergarments with normal level of soil.
A gentle program designed for mixed fabrics
found in delicate clothes.
Cottons;
Mixed;
Daily 60;
Quick 15;
Sports;
Tub Clean;
For cleaning the tub.
Do not add detergent.
White and coloured cotton.
Synthetic or mixed fabric items.
Cold to 40°C
––
You can send any additional program from
Mobile Application to store at this program
position and can recall to using it everytime
when you rotate program knob to this
position. This can be done through the App.
App
Program
Program “Outdoor” is the default stored
program from factory.
3.2 Program Chart
13
Program;
Temperature
range
1200
rpm
2 kg
1200
rpm
4 kg
––
Type of load and soil level Max.
Spin
Speed
Max. Load
(Dry Clothes)
Cold to 40°C
Cold to 40°C
Specially tested program for woollen
garments bearing the “Pure new woollen,
non-shrink, machine washable” label.
Delicates;
Wool ;
Favourite Recall you favourite program.
Delicate fabrics such as acrylics, viscose,
polyester items.
Woolmark Apparel Care - Blue
The wool wash cycle of this machine has been approved by
The Woolmark Company for the washing of wool garments
labelled as “hand wash” provided that the garments are
washed according to the instructions issued by the manufac-
turer of this washing machine. Follow the garment care label
for drying and other laundry instructions. M1361
The Woolmark symbol is a Certification mark in many
countries.
Program;
Temperature
range
Cold to 90°C
1400
rpm
10 kg
1200
rpm
4 kg
800
rpm
3 kg
1400
rpm
10 kg
1400
rpm
10 kg
1400
rpm
10 kg
1200
rpm
4 kg
800
rpm
1.5 kg
1400
rpm
5.5 kg
–1.5 kg
––
Type of load and soil level Max.
Spin
Speed
Max. Load
(Dry Clothes)
30°C
60°C
Vapour
Refresh
Lightly soiled synthetics or mixed fabrics.
This cycle removes odours and helps to
dewrinkle the laundry.
Cold to 60°C
Cold to 60°C
30°C to 60°C
Bedding; Special program for one synthetic blanket,
duvet, bedspread and so on.
Rinse + Spin To rinse and spin the laundry.
Spin
To spin the laundry and drain the water in
the drum.
Energy
Saver;
Cold and
40°C
1)
White and colourfast cotton. Set this
program to have a good washing results and
decrease the energy consumption. The time
of the washing program is extended.
Coloured cotton e.g. shirts, blouses, towels
and undergarments with normal level of soil.
A gentle program designed for mixed fabrics
found in delicate clothes.
Cottons;
Mixed;
Daily 60;
Quick 15;
Sports;
Tub Clean;
For cleaning the tub.
Do not add detergent.
White and coloured cotton.
Synthetic or mixed fabric items.
Cold to 40°C
––
You can send any additional program from
Mobile Application to store at this program
position and can recall to using it everytime
when you rotate program knob to this
position. This can be done through the App.
App
Program
Program “Outdoor” is the default stored
program from factory.
1) Energy Saver Program with 40degC, Spin Speed 1400rpm, Off AutoDose
detergent and Off AutoDose softener options selected is recommended for a full
load of normally soiled cotton and is the Energy and Water rating label program.
14 www.electrolux.com
The door stays locked with the water
in the drum. To continue the cycle,
you must press (Start/Pause).
Program
Option
Cottons
Mixed
Bedding
Energy Saver
Vapour Refresh
Tub Clean
Spin
Rinse + Spin
Sports
Quick 15
Daily 60
Wool
Delicates
Favourite
App Program
1)
“Vapour” option can be combined with temperature 40 to 90 °C only.
2)
“Stain” option can be combined with temperature 40 to 90 °C only.
Temperature Touchpad
Press this touchpad repeatedly to increase
or decrease the wash temperature if you
want your laundry to be washed at a
temperature different from the one
proposed by the washing machine.
Spin Selection Touchpad
●
●
Press this touchpad repeatedly to increase
or decrease the spin speed or select Rinse
Hold, if you want your laundry to be spun
at a speed different from the one proposed
by the washing machine.
No spin option eliminates all the spin
phases and increase the number of
rinses.
No Spin ( )
By selecting this option the water of the last
rinse is not emptied out and the drum turns
regularly to prevent the laundry creases.
The door is still locked to indicate that the
water must be emptied out.
Rinse Hold ( )
AutoDose
Detergent
No
Spin
Rinse
Hold
−− −
−− −
−
−
AutoDose
Softener
−
−
Extra
Rinse
Delay
End
−
−
1)
Vapour
−
−
Prewash
−
−
Extra
Silent
−
−
●
By selecting this option, the machine will
not drain the water of the last rinse to avoid
wrinkling the laundry. All spinning phases
are suppressed (intermediate spin and final
spin). This washing cycle is very quiet, and
can be selected at night or other
appropriate times.
Extra Silent ( )
The door stays locked with the water
in the drum. To continue the cycle,
you must press (Start/Pause).
2)
Stain
−
−
Delay End ( ) Touchpad
Before you start the program, this option
makes it possible to define the end of the
washing program from minimum of 1 hour
to maximum of 20 hours.
If program duration is longer than
3 hours, minimum Delay End
option starts from 4 hours.
After selecting Delay End time, press
Start/Pause touchpad to start the
program. Machine will then countdown
and update time on the display every
hours until it reaches the starting point of
the wash cycle.
Press the Delay End touchpad to choose
the end time as you wish. The display
shows the number of hours and the
indicator beside the touchpad is on.
For example, if the program duration of
your selected program is 3.20 hours and
you define the “Delay End” time to 6
hours. This means your wash program
will finish in 6 hours. (See diagram)
3.20 hrs.2.40 hrs.
Working Cycle
“Delay End” Time : 6 hrs.
Pressed
Start/Pause
End of
Cycle
Start the
Program
Countdown
This option must be selected after
choosing the wash program, and
before pressing the “Start/Pause”
touchpad.
If you wish to modify or cancel Delay End
option after starting the program, follow
the steps below:
set the washing machine to PAUSE by
pressing “Start/Pause” touchpad;
–
press the “Start/Pause” to start the
program.
–
deselect this option by pressing
“Delay End” touchpad repeatedly till
the display shows delay time “ ”;
–
Remote ( ) Touchpad
This option allows you to connect
washing machine to Wi-Fi network and to
link it to your smart phone.
By this functionality you can receive
notifications, control and monitor your
washing machine from your mobile
devices.
To connect the washing machine with
your smart phone you need:
When the door is open, remote
functions are disabled.
Connection setting and other
suggestions please refer to attached
leaflet of this user manual.
WI-FI specification requirements:
Wireless network at home with internet
connection enabled.
●
Smart Phone connected to wireless
network.
●
Frequency
Protocol
Max Power
2.4 GHz according to
local country regulation
IEEE 802.11b/g/n
According to local country
regulation
3.3 Program Options Compatibility
3.4 Options
15
Delay End ( ) Touchpad
Before you start the program, this option
makes it possible to define the end of the
washing program from minimum of 1 hour
to maximum of 20 hours.
If program duration is longer than
3 hours, minimum Delay End
option starts from 4 hours.
After selecting Delay End time, press
Start/Pause touchpad to start the
program. Machine will then countdown
and update time on the display every
hours until it reaches the starting point of
the wash cycle.
Press the Delay End touchpad to choose
the end time as you wish. The display
shows the number of hours and the
indicator beside the touchpad is on.
For example, if the program duration of
your selected program is 3.20 hours and
you define the “Delay End” time to 6
hours. This means your wash program
will finish in 6 hours. (See diagram)
3.20 hrs.2.40 hrs.
Working Cycle
“Delay End” Time : 6 hrs.
Pressed
Start/Pause
End of
Cycle
Start the
Program
Countdown
This option must be selected after
choosing the wash program, and
before pressing the “Start/Pause”
touchpad.
If you wish to modify or cancel Delay End
option after starting the program, follow
the steps below:
set the washing machine to PAUSE by
pressing “Start/Pause” touchpad;
–
press the “Start/Pause” to start the
program.
–
deselect this option by pressing
“Delay End” touchpad repeatedly till
the display shows delay time “ ”;
–
Remote ( ) Touchpad
This option allows you to connect
washing machine to Wi-Fi network and to
link it to your smart phone.
By this functionality you can receive
notifications, control and monitor your
washing machine from your mobile
devices.
To connect the washing machine with
your smart phone you need:
When the door is open, remote
functions are disabled.
Connection setting and other
suggestions please refer to attached
leaflet of this user manual.
WI-FI specification requirements:
Wireless network at home with internet
connection enabled.
●
Smart Phone connected to wireless
network.
●
Frequency
Protocol
Max Power
2.4 GHz according to
local country regulation
IEEE 802.11b/g/n
According to local country
regulation
AutoDose Liquid Detergent
Touchpad
AutoDose Fabric Softener
Touchpad
For activating and deactivating the
automatic detergent dosing refer to
“5.2 Detergent dispenser with AutoDose
tanks and manual compartments” on
page 19.
For activating and deactivating the
automatic fabric softener loading
Refer to “5.2 Detergent dispenser
with AutoDose tanks and manual
compartments” on page 19.
16 www.electrolux.com
Stain Touchpad
Extra Rinse Touchpad
Press this touchpad to add the stain
phase to a program. The indicator of
this option comes on.
Use this function for laundry with hard
to remove stains.
You have 2 choices for adding stain
remover:
Detergent
for
Prewash
phase.
This option is recommended for people
who are allergic to detergents, and in
areas where the water is very soft. Use
this option to add two rinse phases to
a program.
Select this option if you wish your
laundry to be pre-washed before the
main wash.
Use this option for heavy soil, especially
if containing sand, dust, mud and other
solid particles.
This option increases the program
duration.
You have 2 options for adding
prewash detergent:
Select this option to add approximately
30 minutes of tumbling in vapour during
the wash cycle. Vapour helps open
fabric bers up to allow laundry additives
to release tough stains. The indicator of
this option will be on.
• Vapour may not necessarily be visible
inside the drum during a vapour wash
cycle. Vapour is created below the
drum and allowed to naturally rise
into the clothes.
• Vapour may not be present during the
entire vapour wash cycle.
• Vapour function is more effective with
half load.
1. If AutoDose Detergent is Off, put
the detergent for Main wash phase
into the compartment “Manual”
(for powder) or
I (for liquid)
and pour detergent for Prewash
phase directly into the drum.
2. If AutoDose Detergent is On,
detergent is dispensed from the
AutoDose compartment during
Prewash phase. So, you do not
need to add more detergent.
1. If AutoDose Detergent is Off,
when you set this function, put the
stain remover into the compartment
“Manual”
(powder) or I
(liquid) together with detergent
(powder with powder / liquid with
liquid).
2. If AutoDose Detergent is On,
The detergent is dispensed from
the AutoDose compartment. You
can put stain remover into the
compartment “Manual”
(powder)
or
I (liquid).
This function increases the
program duration.
If you press AutoDose
button
while Stain option is active,
AutoDose function is switched
off, but Stain option still remains
active in manual mode.
Stain option can be combined
with temperature 40 to 90 °C
only.
Prewash Touchpad
Vapour (
) Touchpad
17
3.5 Settings
Child Safety Lock (
) Option
Program settings that are frequently used
can be saved (e.g. Cotton, 60°C, 1200 rpm,
with Prewash and Vapour).
To program/re-program Favourite with your
own selections and save them, proceed as
follows:
• At the end of the Vapour cycle, the clothes
will be warmer, softer and detached from
the drum.
This setting permits you to either enable
or disable the buzzer at the end of the
program. As an example, you might wish
to disable this buzzer when you start a
wash when going to bed, so that when
the wash nished approximately 1 hour
later, it will not disturb you through the
night.
• To disable the buzzer sound, press
“Prewash” and “Stain” touchpads at
the same time about 3 seconds, the
icon “
” will show on display along
with buzzer sound.
• To return to default conguration press
these 2 touchpads at the same time
about 3 seconds, the icon “
” will
show on display along with buzzer
sound.
To recall the favourite wash program, turn
selector knob to “Favourite
” program.
You will get acknowledgement on the screen
when the Favourite program is loaded.
Your appliance is provided with CHILD
SAFETY LOCK which permits you to leave
the appliance unsupervised with the door
closed without having to worry that children
might be injured by or cause damage to the
appliance.
• To activate the function, press and
hold “Extra Rinse” touchpad about 2
seconds until the display shows the
icon “
”.
• To deactivate the function, press and
hold “Extra Rinse” touchpad about 2
seconds until the display shows the
icon “
”.
To set “Child Lock” option:
1. Put machine in Stand-By mode.
2. Select your desired wash settings.
3. To save favourite program, press and hold
“Stain” touchpad about 2 seconds and you
will hear “Bip, Bip” sound and “Favourite”
LED is ashing.
If Vapour option is selected, rinse
temperatures will be elevated.
During a vapour cycle, you may notice
vapour exiting from the drain hose of
the washing machine, this is normal
and there is no cause for alarm.
App Program cycle cannot be saved as
a Favourite on the appliance.
Set this option after pressing the
Start/Pause touchpad.
Error warning beeps such as critical
faults are not disabled.
If you press any touchpad while
Child Lock is activated, the icon
“
” will ash on display 3 times
along with buzzer sound.
The touchpads are locked (except
for the On/Off button).
This function remains enabled even
after the appliance is switched off.
Save Favourite ( ) Program
Enabling/Disabling End-Of-
Wash Buzzer
18 www.electrolux.com
This touchpad has 2 functions:
Start/Pause ( )1.
To interrupt a program which is
running, press this touchpad to pause
the machine, the Start/Pause pilot light
flashes.
After you have selected the desired
program and options, press this
touchpad to start the machine. If you
have selected a “Delay End” option,
the countdown will begin and will be
shown on the display.
To restart the program from the point
at which it was interrupted, press this
touchpad again, the Start/Pause pilot
light will stop flashing.
Add Clothes ( )2.
To add clothes:
Pressing the “Start/Pause”
touchpad to pause the program.
You can only add clothes when
the icon “ ” shown on the
display.
1.
2.
Resume the program by pressing
“Start/Pause” touchpad again.
4.
Add clothing and close the door.
3.
Wait for the machine to come to a
complete stop before opening the
door (wait for door lock “ ” icon
to turn off).
During installation or before rst use
you may observe some water in the
machine. This is a residual water left
in the machine after a full functional
test in the factory to ensure the
machine is delivered to customers in
perfect working order and is no cause
for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Ensure that the electrical and
water connections comply with the
installation instructions.
3. Make sure to ll with liquid detergent
and fabric softener the tanks
marked by
. Refer to “Basic
Setting” paragraph in “The AutoDose
technology” chapter.
4. Put 2 litres of water in the
detergent compartment for washing
phase. This activates the drain
system.
5. Set and start a program for Cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from
the drum and the tub.
NOTE
3.6 Start/Pause ( ) and Add
Clothes ( ) Touchpad
4. BEFORE FIRST USE
19
Press the On/Off button to turn on the
washing machine. Turn the knob to
set a program. The washing machine
will propose a temperature and
automatically select the spin value
provided for the program you have
chosen.
Check and remove objects (if there
are any) that could be trapped in the
fold.
1.
2.
Connect the main plug to the main
socket.
Turn the water tap on.
3.
Place the laundry in the drum, one
item at a time, shaking them out as
much as possible.
5.
Close the door.
6.
4.
Make sure that no laundry
remains between the seal and
the door.
The selector knob can be turned either
clockwise or counter-clockwise.
5. DAILY USE
5.1 Loading The Laundry 5.2 Detergent Dispenser With
Autodose Tanks And Manual
Compartments
Do not put POWDER detergent in the
AutoDose compartment.
NOTE
Read this chapter carefully.
WARNING!
AutoDose
Manual
Manual
•
I
•
• Auto-dosing tanks are for liquid
detergent and fabric softener only.
•
Manual compartment for powder
detergent.
•
I Manual compartment for liquid
detergent.
(Refer to page 28 “WASHING HINTS”)
When using detergent and any other
treatments, always follow the instructions
that you nd on the packaging of the
detergent products.
We recommend not to exceed the
maximum indicated level in each
compartment (Max).
If both AutoDose options are enabled for
selected program, detergent and fabric
softener are automatically loaded.
If one or both AutoDose options are
disabled, manually add detergents to the
relevant manual compartments.
20 www.electrolux.com
When using liquid detergent
(Manual compartment), make sure
that the special container for liquid
detergent is inserted. Refer to the
“Manual lling the detergent and
additives” paragraph in this chapter.
Maximum level for detergent/
additives quantity.
(*) By factory default, the appliance
operates in basic Standard Mode.
To change conguration to Dual-
Detergent Mode or Link Mode, you
need to complete the setup on the
mobile application “Electrolux Life”
.
Advance functions like ne-tuning,
can be enabled on the app to make
available on the control panel.
• Manual compartment for liquid
additives (fabric softener, fabric
conditioner, starch).
AutoDose
The pre-set dosages are 50 ml for
detergent tank and 25 ml for fabric
softener tank: the optimal conguration
to meet majority of use condition.
The AutoDose system has 3 modes:
However, under extreme conditions (very
soft or very hard water) and particular type
of detergent (such as super concentrated),
we recommend to adjust the pre-set
dosage by following the instruction given
on detergent and fabric softener container:
e.g when using super concentrated
detergent you may need to reduce the
pre-set dosage considerably.
If the washing results are not satisfactory
or there is too much foam during washing,
you may need to change this setting.
Check on the detergent product instruction
to identify the right dosage considering
a normal laundry soil level, the actual
water hardness and the additional dosage
suggested for larger load.
1. Standard Mode - Allows you to store
liquid detergent and softener in the
AutoDose compartments, and to toggle
on/off auto dosing of detergent and/or
softener.
2. Dual-Detergent Mode (*) - Allows you to
store 2 different types of liquid detergents
in the 2 AutoDose compartments, and
toggle on/off or switch between them.
3. Link Detergent Mode (*) - Allows you
to store 1 type of liquid detergent in both
AutoDose compartments, and toggle on/
off auto doing of the liquid detergent.
1. Identifying the water hardness
level: Hard water can reduce the
effectiveness of the detergent, for
this reason detergent manufacturer
recommend to adjust the dosage
based on water hardness level. Check
the water hardness level in your area.
The levels are generally indicated as:
soft, medium and hard. If necessary,
please contact your local water
authority to check the water hardness
in your area.
2. Identifying the customized detergent
dosage: Check the label in the
detergent/fabric softener container
suggesting the quantity to use. This
suggestion is measured combining
three different factors:
• Water hardness level;
• Normal soil level;
• Rated capacity of the appliance
(e.g. maximum load capacity
9 kg). If the rated capacity on
the product container refers to
lower capacity appliances, the
customized dosage should be
increased.
21
Please read “Detergents Type And
Quantity Of Detergent” on page
29.
We recommend that you do not
exceed the maximum indicated
level (
).
Filling the detergent and
additives on AutoDose system
1. Open the detergent dispenser.
2. Lift up the AutoDose cover lid.
3. Gently pour only liquid detergent in
the AutoDose detergent tank
. Fill
up to the maximum indicated level
.
4. Gently pour only liquid softener in the
AutoDose fabric softener tank
. Fill
up to the maximum indicated level
.
5. Close the AutoDose cover lid.
6. Gently close the detergent dispenser
by pushing all the way in.
In Standard Mode, you can toggle on/off
auto dosing of detergent and softener.
By default, both AutoDose detergent
and softener are enabled the rst time
appliance is powered on.
Press AutoDose
touchpad to toggle
on and off, the relevant symbols will
show on display if enabled.
To Activate/Deactivate AutoDose
Detergent (
)
1. Standard Mode
22 www.electrolux.com
Fine-tuning settings is not
“permanent”, and will return to
normal dose after the cycle ends.
Fine-tuning settings is not
“permanent”, and will return to
normal dose after the cycle ends.
AutoDose Softener (
) touchpad
is disabled in this mode, the display
will show “-- -” when touched it.
In Dual-Detergent Mode, you can select
which of the 2 different detergents that
are stored in the AutoDose compartments
to be activated.
Touch AutoDose Detergent
touchpad
to toggle through the following options:
If you have enabled the ne-tuning feature
in the app to allow it to be available on the
control panel, pressing on the AutoDose
Detergent (
) touchpad will toggle
through the following options:
To Activate/Deactivate Detergent
(Basic Setting)
To Select Detergent Amounts
(Advance Setting)
Press AutoDose softener
touchpad to
toggle on and off, the relevant symbols
will show on display if enabled.
If you have enabled the ne-tuning
feature in the App to allow it to be
available on the control panel, pressing
on the AutoDose Detergent (
)
touchpad will toggle through the following
options:
If you have enabled the ne-tuning
feature in the App to allow it to be
available on the control panel, pressing
on the AutoDose Softener
touchpad
will toggle through the following options:
•
Normal dosage (default)
•
A little more detergent
•
A little less detergent
•
Detergent 1 - Main compartment,
normal dosage (default)
•
Detergent 1 - Main compartment,
a little more detergent
•
Detergent 1 - Main compartment,
a little less detergent
•
Main compartment (default)
•
Secondary compartment
•
Normal dosage (default)
•
A little more softener
•
A little less softener
To Activate/Deactivate AutoDose
Softener (
)
To Select Detergent Amounts
(by using Electrolux Life App)
To Select Softener Amounts
(by using Electrolux Life App)
2. Dual-Detergent Mode (by
using Electrolux Life App)
Detergent 1 Detergent 2
23
Fine-tuning settings is not
“permanent”, and will return to
normal dose after the cycle ends.
Fine-tuning settings is not
“permanent”, and will return to
normal dose after the cycle ends.
AutoDose Softener touchpad is
disabled in this mode, the display
will show “-- -” when touched it.
In Link Mode, both compartments are
lled with the same detergent. You
can toggle On/Off dosing of AutoDose
detergent.
Touch AutoDose Detergent
touchpad
to toggle on/off both detergent tanks.
Detergent 1 and Detergent 2 symbols will
link together with the Link symbols shown
in the diagram below.
If you have enabled the ne-tuning feature
in the app to allow it to be available on the
control panel, pressing on the AutoDose
Detergent (
) touchpad will toggle
through the following options:
To Activate/Deactivate Detergent
(Basic Setting)
To Select Detergent Amounts
(Advance Setting)
•
Detergent 2 - Secondary
compartment, normal dosage
•
Detergent 2 - Secondary
compartment, a little more detergent
•
Detergent 2 - Secondary
compartment, a little less detergent
•
Normal dosage (default)
•
A little more detergent
•
A little less detergent
3. Link Mode (by using
Electrolux Life App)
Same Detergent
Enter the AutoDose conguration
mode before proceeding with any
program setting. The conguration
mode may cancel temporary
settings.
AutoDose conguration
mode
1. Press the On/Off button for a few
seconds to activate the appliance.
2. Wait about 10 seconds for appliance
internal check.
3. To enter in conguration mode, touch
and hold “Temp” and “Spin” touchpads
simultaneously for a few seconds until
appears on display.
4. Press
Detergent touchpad to
select congure detergent dosage.
Touch the “Temp” touchpad repeatedly
to increase and “Spin” touchpad to
reduce. Minimum step is 1 ml (you can
press and hold touchpad to increase
the increment to 10ml/step).
24 www.electrolux.com
Rell the tanks with the same
detergent and fabric softener as
before. If changing either of the liquid
detergents, clean the tanks before
relling (see section 8.5 for instructions
on how to clean the tanks).
If the tanks are lled before the
appliance is powered on for the rst
time, the AutoDose indicator will not
blink.
When the activated tank reaches a low level
of detergent,
indicator blinks slowly and
continuously on the display.
It will stop blinking when the compartment
is relled.
If tank is not relled, once a program has
started, the indicator will stop blinking and
stay steadily lit. Once the program is n-
ished, it will start blinking again.
Unless AutoDose is turned OFF, if a com-
partment has reached low level, the set dos-
age for that compartment will be shown by
the display for a few seconds each time the
drawer is opened, to remind rell is needed.
If in both tanks detergent level is low, both
indicators blink, but only the set dosage for
detergent will be displayed.
5. Press Softener touchpad to select
congure softener dosage.
Touch the “Temp” touchpad repeatedly to
increase and “Spin” touchpad to reduce.
Minimum step is 1 ml (you can press and
hold touchpad to increase the increment
to 10ml/step).
6. To save and exit conguration mode,
press and hold “Temp” and “Spin”
touchpads combination again for 3
seconds or you can turn the knob to any
position.
Do not rell the AutoDose tanks
unless appliance indicates that one or
both tanks are empty.
AutoDose low level indication
Manual lling the detergent
and additives
You may need to use a different
detergent or fabric softener than the
ones used in the AutoDose tanks. First,
make sure that the AutoDose tanks are
disabled and then pour the detergent,
fabric softener or other treatments in the
manual compartments.
1. Open the detergent dispenser.
2. Lift out the special container for liquid
detergent.
We recommend that you do not
exceed the maximum indicated
level (
).
Drawer open indication
When a program is running, the detergent
drawer must always be closed.
A sensor in the drawer detects if the
drawer is open (or not properly closed)
while the program is running. In such case,
the appliance will immediately be paused.
If you press the Start/Pause
touchpad,
an error sound is generated and
everything in the display will turn off
except the AutoDose symbols (
and
) remain lit for a few seconds. Then
the display returns to the previous paused
state. This will happen even if AutoDose is
turned off.
To restart the program, ensure the drawer
is properly closed and press Start/Pause
touchpad.
25
Manual lling the liquid
detergent
1. Insert the special container for liquid
detergent.
2. Pour the liquid detergent in the
compartment
.
5. Gently close the detergent dispenser
by pushing all the way in.
3. Gently close the detergent dispenser
by pushing all the way in.
3. Put the powder detergent in the
compartment
. If using liquid
detergent, make sure special
container is inserted.
4. If desired, pour the fabric softener in
the compartment
.
If the machine has not been
used for more than 4 weeks
with full tanks, detergent/
softener can become viscous
or dry out. It is recommended
to clean the drawer as indicated
in “Care and Cleaning” chapter.
(see page 31)
1. If you want your laundry to be spun or
use temperature different from the one
proposed by the washing machine,
press “Spin” and “Temp” touchpads
repeatedly to change the spin speed
and temperature.
Press the option touchpads, if you
want your laundry to be washed with
special functions.
2. If you want to dene the end of the
washing program, press the “Delay
End” touchpad repeatedly to choose
your washing machine working time.
5.3 Options Setting
• Different functions can be
combined which is dependent on
the program selected.
• If an option is not compatible with
the wash program selected, the
symbol “
” will ash on
display along with buzzer sound.
NOTE
26 www.electrolux.com
The appliance will automatically adjust
the selected program duration
according to the type and size of the
load.
−
The display will show adjusted
program duration.
−
To start a program, press the Start/Pause
touchpad. The corresponding pilot light
will stop flashing and a default program
duration will be displayed on the screen.
After approx. 15 minutes from the start of
a program:
If you press any touchpad while a
program is operating, the symbol “ ”
will flash on display along with buzzer
sound. (except Start/Pause touchpad
and On/Off button)
To pause, press Start/ Pause.
The indicator will start flashing.
−
Press the Start/Pause again.
The program will continue.
−
Changing a running program is possible
only by switching off the appliance.
Press the “On/Off” button to cancel
the program and to turn off the
appliance.
−
It may be possible to change some of the
options after a wash program has started.
Press the “On/Off” button again to
start the appliance.
−
Press the touchpad Start/Pause. The
indicator will start flashing.
1.
If available change the options that
you wish.
2.
Press Start/Pause again. The program
will continue.
3.
While a program or the Delay End is
operating, the appliance door is locked
and the display shows the indicator “ ”.
First, set the machine to PAUSE by
pressing the “Start/Pause” touchpad. Wait
until the door lock indicator goes off, then
the door can be opened.
If the door lock indicator “ ” does not
disappear, this means that the machine
is already heating and the water level is
above the bottom edge of the door or the
drum is turning. In this case the door
CAN NOT be opened. If you need to
open it, you must drain the water to open
the door.
In case of Remote ( ) function is
activated, when program cycle end and
anticrease phase is complete. The door
will remain locked for 5 minutes, if you
want to open the door at that time, press
Remote ( ) touchpad once to turned off
function then the door is unlocked.
NOTE
NOTE
Now you can set a new wash program
and change any available options. Press
Start/Pause to start the new program.
The appliance will not drain the water
(except programs; Vapour Refresh, Spin,
Rinse + Spin, Tub Clean).
In case of emergency please refer
to “Emergency door opening” on
page 41.
5.4 Starting A Cycle ( ) 5.7 Changing The Options
5.8 Opening The Door
5.5 Interruption Of A Program
5.6 Changing A Program
27
The appliance will automatically adjust
the selected program duration
according to the type and size of the
load.
−
The display will show adjusted
program duration.
−
To start a program, press the Start/Pause
touchpad. The corresponding pilot light
will stop flashing and a default program
duration will be displayed on the screen.
After approx. 15 minutes from the start of
a program:
If you press any touchpad while a
program is operating, the symbol “ ”
will flash on display along with buzzer
sound. (except Start/Pause touchpad
and On/Off button)
To pause, press Start/ Pause.
The indicator will start flashing.
−
Press the Start/Pause again.
The program will continue.
−
Changing a running program is possible
only by switching off the appliance.
Press the “On/Off” button to cancel
the program and to turn off the
appliance.
−
It may be possible to change some of the
options after a wash program has started.
Press the “On/Off” button again to
start the appliance.
−
Press the touchpad Start/Pause. The
indicator will start flashing.
1.
If available change the options that
you wish.
2.
Press Start/Pause again. The program
will continue.
3.
While a program or the Delay End is
operating, the appliance door is locked
and the display shows the indicator “ ”.
First, set the machine to PAUSE by
pressing the “Start/Pause” touchpad. Wait
until the door lock indicator goes off, then
the door can be opened.
If the door lock indicator “ ” does not
disappear, this means that the machine
is already heating and the water level is
above the bottom edge of the door or the
drum is turning. In this case the door
CAN NOT be opened. If you need to
open it, you must drain the water to open
the door.
In case of Remote ( ) function is
activated, when program cycle end and
anticrease phase is complete. The door
will remain locked for 5 minutes, if you
want to open the door at that time, press
Remote ( ) touchpad once to turned off
function then the door is unlocked.
NOTE
NOTE
Now you can set a new wash program
and change any available options. Press
Start/Pause to start the new program.
The appliance will not drain the water
(except programs; Vapour Refresh, Spin,
Rinse + Spin, Tub Clean).
When the program is completed and
the door lock indicator “ ” goes off,
you can open the door.
The drum turns regularly to prevent
the creases in the laundry.
You must drain the water to
open the door.
The indicator “Start/Pause” flashes to
remind you to drain the water.
−
−
−
At the end of the program, the time
remaining can suddenly decrease from
7 minutes or less to 0 due to the
overestimated total program time during
the load sensing phase. In some cases
(with perfectly balanced load) the
program time can be shorter than the
time estimated after the load sensing
phase is completed. This is a normal
behavior of the machine and not a cause
for concern as it does not compromise its
performance.
The AUTO Off mode automatically
deactivates the appliance to decrease
the energy consumption when:
You do not press any buttons for 5
minutes before you press “Start/Pause”.
Press the “On/Off” button to activate
the appliance again.
After 5 minutes from the end of the
washing program.
Press the “On/Off” button to
reactivate the appliance. Display will
show the end of the last wash.
−
−
Press any touchpad again to show
the last wash program.
−
NOTE
The door lock indicator “ ” is on.
The door stays locked.
1.
To drain the water:
Press the “Start/Pause ” touchpad.
The appliance drains the water and
spins with the maximum spin speed
for selected program.
Alternatively, before pressing the
“Start/Pause” touchpad, you can press
the “Spin ” touchpad to change the
spin speed. You can select “No Spin
( )”, if you want the machine to
only drain the water.
2.
Press the “On/Off” button to deactivate
the appliance.
3.
After approximately 18 hours, if you do
not press Start/Pause touchpad, the
appliance will drain and spin automatically
(except for “Wool” program) .
NOTE
The appliance stops automatically.
The acoustic signal will operate.
The display will show “ ”.
The indicator of the touchpad
Start/Pause goes off.
−
−
−
−
−
−
−
−
The door lock indicator “ ” goes off.
Remove the laundry from the
appliance. Make sure that the drum is
empty.
Keep the door partly open, to prevent
the mildew and odours.
Turn off the water tap.
(Option “Rinse Hold ” or
“Extra Silent ” is used)
5.9 At The End Of The
Program
5.11 AUTO Off Mode
5.10 When The Washing
Program Is Completed, But
There Is Water In The Drum
28 www.electrolux.com
Follow the wash code symbols on each
garment label and the manufacturer’s
washing instructions. Sort the laundry as
follows: whites, coloureds, synthetics,
delicates, woollens.
90°C
Temp Soil level
60°C
50°C
40°C
30°C
Cold
For normally soiled, colourfast
garments (e.g. shirts, night
dresses, pajamas....) in linen,
cotton or synthetic fibres and
for lightly soiled white cotton
(e.g.underwear).
For delicate items (e.g. net
curtains), mixed laundry
including synthetic fibres and
woollens bearing the label pure
new wool, machine washable,
non-shrink.
For normally soiled white
cottons and linen (e.g. teacloths,
towels, tablecloths, sheets...).
Never wash whites and coloured
fabrics together. Whites may lose their
“whiteness” in the wash.
New coloured items may run in the first
wash; they should therefore be
washed separately the first time.
Button up pillowcases,
close zip fasteners,
hooks and poppers.
Tie any belts or long
tapes.
Remove persistent stains before
washing.
Rub particularly soiled areas with a
special detergent or detergent paste.
Treat curtains with special care.
Remove hooks or tie them up in a bag
or a net.
Make sure that no
metal objects are
left in the laundry
(e.g. coin, hair clips,
safety pins, pins).
Washing a maximum load makes the
most efficient use of water and energy.
For heavily soiled laundry, reduce the
load size.
Cotton, linen
drum full but not too
tightly packed;
Clothes LoadQuantity
Synthetics
drum no more than
half full;
Delicate fabrics
and woollens
drum no more than
one third full.
Wash bras, pantyhose
and other delicates in a
mesh laundry bag,
which you can purchase
from your supermarket.
Make sure that you wash lint collectors
separately from lint producers.
General rules:
Pre-treatment sprays and stain remover
can damage plastic components on your
washing machine.
If you use pre-treatment sprays or stain
removers, apply them to the clothing well
away from your washing machine.
WARNING!
6. WASHING HINTS
6.1 Sorting The Laundry
6.2 Temperatures
6.4 Maximum Loads
Recommended loads are indicated in the
program charts on page 12.
6.5 Removing Stains
6.3 Before Loading The
Laundry
29
Oil based paint: moisten with benzine
stain remover, lay the garment on a soft
cloth and dab the stain; treat several
times.
Dried grease stains: moisten with
turpentine, lay the garment on a soft
surface and dab the stain with the
fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or
a rust removing product used in cold
water. Be careful with rust stains which
are not recent since the cellulose
structure will already have been damaged
and the fabric tends to hole.
Mould stains: treat with bleach, rinse
well (whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with
acetone (*), lay the garment on a soft
cloth and dab the stain.
Lipstick: moisten with acetone (*) as
above, then treat stains with methylated
spirits. Remove any residual marks from
white fabrics with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks with
bleach.
Ink: depending on the type of ink,
moisten the fabric first with acetone (*),
then with acetic acid; treat any residual
marks on white fabrics with bleach and
then rinse thoroughly.
Tar stains: first treat with stain remover,
methylated spirits or benzine, then rub
with detergent paste.
(*) do not use acetone on artificial silk.
Low sudsing detergent is required for this
washing machine to prevent oversudsing
problems, unsatisfactory washing result
and harm to the machine.
Do not use wrong types of detergent,
such as Top Loading, Handwash
detergent or Soap-Based products in
your frontload washing machine. This
can result in excessive suds, longer
cycle time, low spin speeds, poor
rinsing and overloading of the motor.
The choice and quantity of detergent will
depend on ;
type of fabric (delicates, woollens,
cottons, etc.) ;
degree of soil ;
size of the load ;
wash temperature ; and
hardness of the water used.
the colour of clothes ;
Information on hardness of the water in
your area can be obtained from the
relevant water supply company, or from
your local authority.
You may have to try using the detergent
quantity as per manufacturers’ instructions
then compare the wash result to the list
below and adjust the amount of detergent
for your future washes accordingly.
Water hardness is classified by so-called
“degrees” of hardness.
The choice of detergent and use of
correct quantities not only affects your
wash performance, but also helps to avoid
waste and protect the environment.
Although biodegradable detergents
contain substances which in large
quantities can upset the delicate balance
of nature.
Low sudsing detergents designed for
front load washing machines are labelled
“Front Loading”, “high efficiency”, “HE”,
such as Cold Power for Front Loaders or
“Matic”.
Quantity of detergent to be used
Blood: treat fresh stains with cold water.
For dried stains, soak overnight in water
with a special detergent then rub in the
soap and water.
Stubborn stains may not be removed by
just water and detergent. It is therefore
advisable to treat them prior to washing.
6.6 Detergents Type And
Quantity Of Detergent
30 www.electrolux.com
the washload to turn grey,
greasy clothes.
inadequate rinsing.
reduced washing effect,
you are washing a small load,
large amounts of foam during washing.
the laundry is lightly soiled,
Use less detergent if:
These symbols appear on fabric labels, in order to help you choose the best
way to treat your laundry.
Bleach in cold water DO NOT bleach
Bleaching
Hand wash
Max. wash
temperature
95 °C
Hot iron
max. 200 °C
Dry cleaning in
all solvents
Dry cleaning in
perchlorethylene,
petrol, pure alcohol,
R 111 & R 113
Dry cleaning in
petrol, pure alcohol
and R 113
DO NOT
dry clean
Warm iron
max. 150 °C
Lukewarm iron
max. 110 °C
DO NOT iron
Max. wash
temperature
60 °C
Max. wash
temperature
40 °C
Max. wash
temperature
30 °C
DO NOT
wash at all
Ironing
Dry cleaning
Drying
Flat Tumble dry DO NOT
tumble dry
High
temperature
Low
temperature
On clothes
hanger
On the line
Energetic
wash
Delicate wash
oversudsing,
Not enough detergent causes:
Too much detergent causes:
7. INTERNATIONAL WASH CODE SYMBOLS
31
You must DISCONNECT the appliance
from the electricity supply, before you can
carry out any cleaning or maintenance
work.
The water we use normally contains lime.
It is a good idea to periodically use a
water softening powder in the machine.
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
Do not use alcohol, solvents or
chemical products.
Do this separately from any laundry
washing, and according to the softening
powder manufacturer's instructions.
This will help to prevent the formation of
lime deposits.
Leave the door open for a while. This
helps to prevent mould and stagnant
smells forming inside the appliance.
Keeping the door open after a wash will
also help to preserve the door seal.
With the use of low temperature washes
it is possible to get a build up of residues
inside the drum.
We recommend to use “Tub Clean”
program to clean the drum regularly to
remove any residue.
The drum should be empty of laundry.
Press Start/Pause to start the program.
Select the “Tub Clean” program.
To run a maintenance wash:
WARNING!
CAUTION!
8.1 External Cleaning
8.2 Descaling
8.3 After Each Wash
8.4 Maintenance Wash With
“Tub Clean” Program
8.5 Cleaning The Detergent
Dispenser And The Autodose
Tanks
8. CARE AND CLEANING
Before cleaning, make sure that
the all compartments are empty.
Cleaning procedure is also
suggested when brand or type
of detergent, fabric softener or
additives are changed inside the
tanks.
To prevent possible deposits of dried
detergent, clotted fabric softener,
formation of mould in the detergent
dispenser and/or clotted liquid additives
in the AutoDose tanks, once in a
while carry out the following cleaning
procedure:
1. Open the detergent dispenser. Press
the catch as indicated in the picture
and pull the detergent dispenser out.
2. Remove the insert for the softener
and, if inserted, the special container
for liquid detergent.
32 www.electrolux.com
3. Open the drain plugs of each tank and
empty them into a sink.
6. Turn the dispenser up side down and
open the bottom cover as indicated in
the picture.
7. Make sure that all detergent residue is
removed from the conveyor. Use only
soft damp cloth.
8. Put bottom cover back to its position
by aligning its holes on drawer hooks
as indicated in the picture. Close it till
“click” sound is heard.
4. Press the catch on the back as
indicated in the picture and lift up the
top cover to remove it.
5. Wash the drawer and all inserts under
running water.
Do not use sharp or metal brushes
and sponges.
Do not clean with any sharp and
metal brushes or any tools to avoid
damaging pumps and sensors
located the back of the detergent
drawer. If necessary, use only soft
damp cloth.
CAUTION!
WARNING!
33
If some residues remain on the back
area of tanks, soak detergent drawer in
a warm water. Do not use tools to clean
it. Before soaking, remove the handle
by pressing the red button and slide the
handle as indicated in the picture.
WARNING!
9. Make sure that all detergent residue
is removed from the upper and lower
part of the recess. Use a small brush
to clean the recess.
10. Reassembly the drawer as follows:
11. Insert the detergent dispenser into
the guide rails and gently close it till
“click” sound is heard. Run the Quick 15
program without any clothes in the drum.
a. Place the handle if was removed.
b. Place the bottom cover and press
till “click” sound is heard.
c. Place the top cover on the tanks
compartment and press till “click”
sound is heard.
d. Replace components on manual
compartment.
To restore the functionality, rell
tanks with detergent and softener.
If you place a wrong additives in
the tanks, you can easily recover
it by using the drain plug on
both side of the drawer. Before
opening drain plugs ensure to
place a container below the drawer
to collect the liquid. Ensure to
properly close the plugs before
relling.
Regularly examine the drain pump
and make sure that it is clean.
Clean the pump if:
• The appliance does not drain the
water.
• The drum cannot turn.
• The appliance makes an unusual
noise because of the blockage of the
drain pump.
• The display shows an alarm code
because of the problem with water
drain.
8.6 Cleaning The Pump
34 www.electrolux.com
●
●
Disconnect the mains plug from the
mains socket.
WARNING!
Do not remove the filter while the
appliance is operating. Do not clean
the drain pump if the water in the
appliance is hot. The water must be
cold before you clean the drain pump.
To clean the drain pump:
1. Open the drain pump door.
2. Place a suitable water container
below the recess of the drain pump
to collect the water that flows out.
Press the two levers and pull forward
the drainage duct to let the water flow
out.
3. When the container is full of water,
put the drainage duct back again and
empty the container. Do step 2, 3
again and again until no more water
flows out from the drain pump.
4. Push back the drainage duct and
turn the filter counter-clockwise to
remove it.
5. Remove fluff and objects from the
pump (if there are any).
6. Make sure that the impeller of the
pump can turn. If this does not occur,
contact the service centre.
7. Clean the filter under the water tap.
8. Put the filter back into the housing
with exposed section facing up.
Make sure that you correctly tighten
the filter to prevent leakages.
9. Close the drain pump door.
Remove the water inlet hose from
the water tap.
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged. It is therefore
a good idea to clean it from time to time.
To clean the water inlet filters:
1.
Close the water tap.
2.
Guide
35
●
●
Disconnect the mains plug from the
mains socket.
WARNING!
Do not remove the filter while the
appliance is operating. Do not clean
the drain pump if the water in the
appliance is hot. The water must be
cold before you clean the drain pump.
To clean the drain pump:
1. Open the drain pump door.
2. Place a suitable water container
below the recess of the drain pump
to collect the water that flows out.
Press the two levers and pull forward
the drainage duct to let the water flow
out.
3. When the container is full of water,
put the drainage duct back again and
empty the container. Do step 2, 3
again and again until no more water
flows out from the drain pump.
4. Push back the drainage duct and
turn the filter counter-clockwise to
remove it.
5. Remove fluff and objects from the
pump (if there are any).
6. Make sure that the impeller of the
pump can turn. If this does not occur,
contact the service centre.
7. Clean the filter under the water tap.
8. Put the filter back into the housing
with exposed section facing up.
Make sure that you correctly tighten
the filter to prevent leakages.
9. Close the drain pump door.
Remove the water inlet hose from
the water tap.
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged. It is therefore
a good idea to clean it from time to time.
To clean the water inlet filters:
1.
Close the water tap.
2.
Guide
8.7 Cleaning The Water Inlet
Filter
36 www.electrolux.com
Clean the filter in the inlet hose with
a stiff brush.
3.
4.
5.
6.
7. Open the water tap.
Remove the inlet hose behind the
appliance.
Install the inlet hose again. Make
sure that the couplings are tight to
prevent leakages.
Install the valve filter back to the
housing.
Use a suitable tool pulling filter from
the valve (eg. long nose pliers) as
picture.
Clean the filter under the water tap.
37
8.8 Frost Precautions
If the appliance is installed in an area
where the temperature can be less than
0 °C, remove the remaining water from
the inlet hose and the drain pump.
Emergency Drain
1. Disconnect the main plug from the
main socket. Turn off the water tap.
2. Remove the water inlet hose.
3. Remove the drain hose from the rear
support and unhook it from sink or
spigot.
NOTE
Make sure that the temperature is
more than 0 °C before you use the
appliance again.
4. Put the end of the drain and inlet hose
in a container. Let the water ow out
of the hoses.
5. When no more water ows, install the
inlet hose and the drain hose again.
38 www.electrolux.com
The door has not been closed.
(Error code: )
Close the door firmly.
The plug is not properly
inserted into the power socket.
Insert the plug into the power
socket.
There is no power at the
socket.
Please check your domestic
electrical installation.
The Start/Pause touchpad has
not been pressed.
Press the Start/Pause
touchpad.
The “Delay End” has been
selected.
If the laundry are to be
washed immediately, cancel
the “Delay End”.
The Main supply is unstable.
(If appears on the
display.)
Wait until the main supply is
stable. Appliance will start
automatically.
The inlet hose is squashed or
kinked. (Error code: )
Check the inlet hose
connection.
The end of the drain hose is
too low. (Error code: )
Refer to relevant paragraph in
“water drainage” section.
The filter in the inlet hose is
blocked. (Error code: )
Clean the water inlet hose
filter.
The door is not properly closed.
(Error code: )
Close the door firmly.
The water tap is closed.
(Error code: )
Open the water tap.
Machine does
not start:
Machine does
not fill the
water:
Machine fills
then empties
immediately:
Malfunction Possible cause Solution
Certain problems are due to lack of
simple maintenance or oversights,
which can be solved easily without
calling out an engineer. Before
contacting your local Service Centre,
please check troubleshooting.
Once the problem has been
eliminated, press the Start/Pause
button to restart the program. If after
all checks, the problem persists,
contact your local Service Centre.
The appliance does not fill with water
properly.
The appliance door is open or not
closed correctly. Please check the door!
The appliance does not drain the water.
The main supply is unstable. Wait until
the main supply is stable.
No communication between electronic
elements of the appliance. Switch off
and switch on again.
No Registration Data found in machine
or Server.
WARNING! Deactivate the
appliance before you do the
checks.
Alarm Code:
Water leaks inside the machine. Please
call Service Center.
9.1 Possible Failures
9. TROUBLESHOOTING
39
Malfunction Possible cause Solution
Too much detergent or unsuitable
detergent (creates too much
foam) has been used.
Reduce detergent quantity
and use correct type of
detergent.
Check whether there are any leaks from
one of the inlet hose fittings. It is not
always easy to see this as the water runs
down the hose; check to see if it is damp.
Check the water inlet hose
connection.
Too little detergent or unsuitable
detergent has been used.
Increase detergent
quantity or use different
detergent.
The program is still running. Wait until the end of cycle.
There is water in the drum.You must drain the water
to open the door (refer
“Opening The Door” on
This problem may be caused by
a failure of the appliance.
Contact Service. If you
need to open the door,
please read carefully
“Emergency door opening”
Stubborn stains have not been
treated prior to washing.
Use commercial products
to treat the stubborn stains.
The correct temperature was not
selected.
Check if you have selected
the correct temperature.
Excessive laundry load. Reduce load.
The drain hose is damaged. Call Service.
Water leaks inside the machine
(Error code: )
Disconnect the main plug from the
main socket. Turn off the water tab.
Contact your local Service Center.
There is water
on the floor:
Unsatisfac-
tory
washing
results:
The door will
not open:
The drain hose is squashed or
kinked. (Error code: )
Check the drain hose
connection.
The drain pump is clogged.
(Error code: )
Clean the drain filter.
Machine
does not
empty and/or
does not
spin:
The option “Rinse Hold” has been
selected.
Press Start/Pause
touchpad to drain the water
or select spin program.
The laundry is not evenly
distributed in the drum.
Pause the machine and
redistribute laundry manually.
The transit bolts and packing
have not been removed.
Check the correct installa-
tion of the appliance.
The support feet have not been
adjusted.
Check the correct levelling
of the appliance.
Machine
vibrates or
is noisy:
(refer page 29)
(refer page 29)
page 26.
on page 41.
40 www.electrolux.com
Malfunction Possible cause Solution
Detergent over dose. Reduce the detergent
quantity or use another one.
Machine unbalance. Redistribute laundry
manually in the drum and
start the spin phase again.
The laundry is not evenly distributed in
the drum.
Pause the machine and
redistribute laundry manually.
There is very little laundry in the drum. Load more laundry.
Unstable floors eg. wooden floors. Refer to relevant paragraph
in “Positioning” section.
Machine
vibrates or
is noisy:
Cycle time
longer than
displayed:
The electronic unbalance detection
device has cut in because the laundry
is not evenly distributed in the drum.
The laundry is redistributed by
reverse rotation of the drum.
This may happen several times
before the unbalance disappears and
normal spinning can resume. If, after
10 minutes, the laundry is still not
evenly distributed in the drum, the
machine will not spin. In this case,
redistribute the load manually and
select the spin program.
Pause the machine and
redistribute laundry
manually.
Machine not installed properly.Make sure the levelling of
the appliance is correct.
Refer to “Installation”.
Transit bolts or packaging not
removed.
Make sure that the
packaging and/or the transit
bolts are removed. Refer to
“Unpacking”.
The load may be too small. Add more laundry in the
drum.
Machines based on modern technology operate very economically
using very little water without affecting performance.
Spinning
starts late
or machine
does not
spin:
Machine
makes an
unusual
noise:
Registration Data lost or damaged.
(Error Code: )
Restart machine by turn Off
and turn On again. If problem
not solved, please contact
Service Centre.
Remote
function
does not
work:
No water is
visible in
the drum:
The appliance calculated a new time according to the laundry
load.
The cycle is
shorter than
the time
displayed.
(Refer page 29
“Detergents Type And
Quantity Of Detergent”).
41
Malfunction Possible cause Solution
Detergent over dose. Reduce the detergent
quantity or use another one.
Machine unbalance. Redistribute laundry
manually in the drum and
start the spin phase again.
The laundry is not evenly distributed in
the drum.
Pause the machine and
redistribute laundry manually.
There is very little laundry in the drum. Load more laundry.
Unstable floors eg. wooden floors. Refer to relevant paragraph
in “Positioning” section.
Machine
vibrates or
is noisy:
Cycle time
longer than
displayed:
The electronic unbalance detection
device has cut in because the laundry
is not evenly distributed in the drum.
The laundry is redistributed by
reverse rotation of the drum.
This may happen several times
before the unbalance disappears and
normal spinning can resume. If, after
10 minutes, the laundry is still not
evenly distributed in the drum, the
machine will not spin. In this case,
redistribute the load manually and
select the spin program.
Pause the machine and
redistribute laundry
manually.
Machine not installed properly.Make sure the levelling of
the appliance is correct.
Refer to “Installation”.
Transit bolts or packaging not
removed.
Make sure that the
packaging and/or the transit
bolts are removed. Refer to
“Unpacking”.
The load may be too small. Add more laundry in the
drum.
Machines based on modern technology operate very economically
using very little water without affecting performance.
Spinning
starts late
or machine
does not
spin:
Machine
makes an
unusual
noise:
Registration Data lost or damaged.
(Error Code: )
Restart machine by turn Off
and turn On again. If problem
not solved, please contact
Service Centre.
Remote
function
does not
work:
No water is
visible in
the drum:
The appliance calculated a new time according to the laundry
load.
The cycle is
shorter than
the time
displayed.
In case of power failure or appliance
failure, the appliance door remains
locked. The wash program continues
when power is restored. If the door
remains locked in case of failure, it is
possible to open it using the emergency
unlock feature.
Before opening the door:
Make sure that the water temperature
and the laundry are not hot. Wait until
they cool down if necessary.
WARNING!
Make sure that the drum is not
rotating. Wait until the drum stops
rotating if necessary.
Make sure that the water level inside
the drum is not too high. If necessary,
perform an Emergency Drain.
To open the door proceed as follows:
If you are unable to identify or
solve the problem, contact our
service centre.
Before calling service centre, make
a note of the model, serial number
and purchase date of your
machine: the Service Centre will
require this information.
If you are unable to identify or
solve the problem, contact our
service centre.
Before calling service centre, make
a note of the model, serial number
and purchase date of your
machine: the Service Centre will
require this information.
1. Press the On/Off button to switch the
appliance off.
2. Disconnect the mains plug from the
mains socket.
3. Open the filter cover.
4. Without touching the door. Insert a
small flathead screw driver into the
slot on emergency unlock strap(red
strap) and pull down twice then pull
the door open. Repeat if unsuccessful.
Note: Do not pull down emergency
strap too hard.
5. Take out the laundry.
6. Close the filter flap.
(see page 37)
9.2 Emergency Door Opening
42 www.electrolux.com
Dimensions (Height / Width / Depth)
Maximum dry
clothes capacity
Spin speed (Maximum / Minimum) 1400 rpm / 400 rpm
Cottons
Mixed
Bedding
Energy Saver
Vapour Refresh
Tub Clean
App Program
Spin
Rinse + Spin
Sports
Quick 15
Daily 60
Wool
Delicates
Favourite
10 kg
4 kg
3 kg
10 kg
1.5 kg
-
-
10 kg
10 kg
4 kg
1.5 kg
5.5 kg
2 kg
4 kg
-
Program Max. Capacity
85 X 60 X 65.9 cm
Power supply (Voltage / Frequency)
Total power absorbed
Water supply pressure (Maximum / Minimum)
0.8 MPa / 0.05 MPa
220-240 V~ / 50 Hz
2100 W
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
All transit bolts and packing must be
removed before using the appliance.
CAUTION!
Use gloves. Remove the external film.
If necessary, use a cutter.
1.
10. TECHNICAL DATA
11. INSTALLATION
11.1 Unpacking
43
Dimensions (Height / Width / Depth)
Maximum dry
clothes capacity
Spin speed (Maximum / Minimum) 1400 rpm / 400 rpm
Cottons
Mixed
Bedding
Energy Saver
Vapour Refresh
Tub Clean
App Program
Spin
Rinse + Spin
Sports
Quick 15
Daily 60
Wool
Delicates
Favourite
10 kg
4 kg
3 kg
10 kg
1.5 kg
-
-
10 kg
10 kg
4 kg
1.5 kg
5.5 kg
2 kg
4 kg
-
Program Max. Capacity
85 X 60 X 65.9 cm
Power supply (Voltage / Frequency)
Total power absorbed
Water supply pressure (Maximum / Minimum)
0.8 MPa / 0.05 MPa
220-240 V~ / 50 Hz
2100 W
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
All transit bolts and packing must be
removed before using the appliance.
CAUTION!
Use gloves. Remove the external film.
If necessary, use a cutter.
1.
6.
8.
Put one of the polystyrene packaging
elements on the floor behind the
appliance. Carefully put down the
appliance with the rear side on it.
Make sure not to damage the hoses.
Pull up the appliance in vertical
position.
9.
Remove the power supply cable and
the drain and inlet hoses from the
hose holders (A) on the rear of the
appliance.
Remove the cardboard top.
2.
Remove the polystyrene packaging
materials.
3.
Remove the plastic bag which cover
the machine.
4.
Open the door. Remove all the items
from the drum.
5.
7.
Remove the polystyrene base.
44 www.electrolux.com
Use a spirit level on the top and side of
the washing machine to check the levels.
If you do not have a spirit level, as a
guide use the edge of a door frame,
cupboard or bench to check that the
washing machine is leveled.
It is important that your washing machine
stands firm and leveled on the floor to
ensure correct operation. The appliance
must not be installed behind a lockable
door, a sliding door or a door with a
hinge on the opposite side to avoid
restricting the washing machine door.
10.
11.
Pull out the plastic spacers.
12.
Put the plastic caps in the holes (X3).
You can find these caps in the user
manual bag.
Remove the three transit bolts.
A
11.2 Positioning
45
Loosen or tighten the feet to adjust the
level. A correct adjustment of the
appliance level prevents vibration, noise
and the movement of the appliance when
in operation.
Never place cardboard, wood or similar
materials under the machine to
compensate for any unevenness in the
floor. Install the machine on a flat hard
floor. Make sure that air circulation
around the machine is not impeded by
carpets, rugs etc.
When the washing machine is levelled,
try to rock it from corner to corner. If it
does rock, adjust the legs again until it is
levelled and does not rock.
Check that the machine does not touch
the wall or cupboard units.
Connect the water inlet hose to a tap
with 3/4” BSP thread.
Use the hose supplied with the washing
machine. DO NOT USE OLD HOSES.
The inlet hose must not be lengthened.
If it is too short and you do not wish to
move the tap, you will have to purchase
a new, longer hose specially designed
for this type of use.
Loosen the ring nut to angle the hose to
the left or right depending on the position
of your water tap. Do not place the inlet
hose downwards. After positioning the
inlet hose, be sure to tighten the ring nut
again to prevent leaks.
The end of the drain hose can be
positioned in three ways:
Hooked over the edge of a sink,
using the plastic hose guide supplied
with the machine.
check
45°
35°
clockwise “DOWN”
counter clockwise “UP”
11.3 Water Inlet
11.4 Water Drainage
46 www.electrolux.com
Fitting Hose Guide
bend
hose
2.
Adjust length to suit
trough.
Pull apart to
insert hose.
pull hose
1.
450 approx.
Hose
Guide
Push the drain hose onto the spigot
and secure with a clamp, ensure a
loop is formed in the drain hose to
prevent waste from the sink entering
the appliance.
In a sink, drain pipe branch.
Directly into a drain pipe, at a height
of not less than 60 cm and not more
than 90 cm.
The end of the drain hose must always
be ventilated, i.e. the inside diameter
of the drain pipe must be larger than
the outside diameter of the drain hose.
The drain hose must not be twisted or
curled. Run it along the floor; only the
part near the drainage point must be
raised.
In this case, make sure the end cannot
come unhooked when the machine will
be emptied. This could be done by tying
it to the tap with a piece of string or
attaching it to the wall.
For the correct functioning of the
machine, the drain hose must remain
hooked on the proper support piece
situated on the top part of back side of
the appliance.
This branch must be above the trap so
that the bend is at least 60 cm above
the ground.
Max.
90 cm
Min.
60 cm
Max. 90 cm
Min. 60 cm
47
Fitting Hose Guide
bend
hose
2.
Adjust length to suit
trough.
Pull apart to
insert hose.
pull hose
1.
450 approx.
Hose
Guide
Push the drain hose onto the spigot
and secure with a clamp, ensure a
loop is formed in the drain hose to
prevent waste from the sink entering
the appliance.
In a sink, drain pipe branch.
Directly into a drain pipe, at a height
of not less than 60 cm and not more
than 90 cm.
The end of the drain hose must always
be ventilated, i.e. the inside diameter
of the drain pipe must be larger than
the outside diameter of the drain hose.
The drain hose must not be twisted or
curled. Run it along the floor; only the
part near the drainage point must be
raised.
In this case, make sure the end cannot
come unhooked when the machine will
be emptied. This could be done by tying
it to the tap with a piece of string or
attaching it to the wall.
For the correct functioning of the
machine, the drain hose must remain
hooked on the proper support piece
situated on the top part of back side of
the appliance.
This branch must be above the trap so
that the bend is at least 60 cm above
the ground.
Max.
90 cm
Min.
60 cm
Max. 90 cm
Min. 60 cm
The materials marked with the
symbol are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by
disposing them properly in appropriate
collection containers.
To save water, energy and to help
protect the environment, we recommend
that you follow these tips:
Use authorized disposal sites for your old
appliance. Help to keep your country tidy!
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the recycling
of electrical and electronic equipment. By
ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environ-
ment and human health, which could
otherwise be caused by inappropriate
waste handling of this product.
For more detailed information about
recycling of this product, please contact
your local city office, your household
waste disposal service or the shop where
you purchased the product.
Normally soiled laundry may be
washed without prewashing in order to
save detergent, water and time (the
environment is protected too!).
The machine works more economically
if it is fully loaded.
With adequate pre-treatment, stains
and limited soiling can be removed; the
laundry can then be washed at a lower
temperature.
Measure out detergent according to
the water hardness, the degree of
soiling and the quantity of laundry
being washed.
This machine is designed to operate on a
220-240 V, single-phase, 50 Hz supply.
“An incorrect power supply may void
your warranty.”
Check that your domestic electrical
installation can take the maximum load
required (2.1 kW), also taking into
account any other appliances in use.
The manufacturer declines any
responsibility for damage or
injury through failure to comply
with the above safety precaution.
Should the appliance power
supply cable need to be
replaced, this shall be carried
out by our Service Centre.
Connect the machine to an
earthed socket outlet.
CAUTION!
When the appliance is installed, the
power supply cable must be easily
accessible.
11.5 Electrical Connection
12.1 Packaging Materials
12.2 Old Machine
12.3 Ecological Hints
12. ENVIRONMENT CONCERNS
48 www.electrolux.com
13.1 Installing and conguring
“Electrolux Life” App.
13. WI-FI CONNECTIVITY SETUP
This chapter describes how to connect
the smart appliance to the Wi-Fi network
and to link it to a mobile devices.
By this functionality you can monitor and
control your laundry appliance from your
mobile devices.
To connect the appliance to enjoy the full
range of features and services you need:
Make sure that your smart device is
connected to the 2.4 GHz wireless
network.
1. Go to the App Store/Play Store on
your smart device.
2. Download and install App
“Electrolux Life”.
* Minimum requirements: iPhone6/iOS 9.3/
Android 5.1 and above. You will need to install
the Electrolux Life App, create an Electrolux
account and accept the Terms and Conditions
and Electrolux’s Privacy Policy in the App to
use the connected features of the laundry
appliance. Internet and Wi-Fi connections are
required to use the full features of the App and
the laundry appliance. Minimum requirements,
Apps and services are subject to change
without notice.
3. Create an Electrolux account. You can
only create one Electrolux account
per product. This account can be
shared across multiple devices.
4. Setting up your washing machine.
Make sure your machine is plugged in
and operating normally, stand near it
with your smart device.
Tap on “Appliances” at the bottom of
the home screen.
5. Turning on your washing machine
Wi-Fi. Initially your machine creates
its own Wi-Fi network to assist in
setting up. After setup this network
disappears and your machine will
connect to your home Wi-Fi network.
6. Connect your washing machine:
7. Connect your washing machine to
your home Wi-Fi.
Tap on “Add Appliance” and follow the
prompts on screen.
* Setup will take several minutes depending
on your network speed.
Press and hold Remote touch
button for 3 seconds.
The text
pop up for about 5
seconds and the icon
starts
ashing and wireless module begins
starting up. It may takes about 45
seconds before it is ready. When the
wireless module is ready, the text
(Access Point) is on to inform you,
that the access point will be open for
about 3 minute.
The washing machine is now creating
a temporary network for the next step.
iOS
Tap the home button to exit the app.
Go to “Settings” on your phone and
select “Wi-Fi”.
Select your washing machine’s Wi-Fi
network. It is the one that begins with
“AJ-“ – (it may take a few moments to
appear).
Tap the home button to exit your
phone settings and then return to the
Electrolux Life App.
Wait for conrmation of connection
which may take up to a minute before
proceeding to the next step.
Android
For Android devices, select your
washing machine’s Wi-Fi network
from the drop-down box.
You’ll need to select your Wi-Fi
network name and input your
password.
Frequency
Protocol
Max Power
2.4 GHz according to
local country regulation
IEEE 802.11b/g/n
According to local
country regulation
• Wireless network at home with
internet connection enabled.
• Mobile device connected to wireless
network.
49
For iOS devices, you will then
be prompted go to “SETTINGS”
on your phone and select your
Home Wi-Fi, then return to the
Electrolux Life App.
Every time you switch the
washing machine on, the machine
takes 45 seconds to connect to
the network automatically. When
the
indicator stops blinking the
connection is ready.
If you switch the machine off and
on again, the wireless connection
is automatically off.
The Remote Control activates
automatically when you press the
Start/Pause button to start the
program, but it is also possible to
start a program.
If the door is unlock, the Remote
Start is deactivated.
Now it is possible to start the program
remotely.
Press the
Remote touch button.
The
icon is off and the remote start is
deactivated.
1. Press the
Remote button and the
indicator
appears on the display.
2. Press the Start/Pause button to
activate the Remote Start.
8. Product registration; Simply add your
washing machine’s name and the
purchase date.
Connection success!
Please proceed to the next screen to
register the washing machine.
Congratulations!
Now you’re all set up. You can start
exploring the Electrolux Life App.
To switch the wireless connection
off, Press and hold
Remote touch
button for 3 seconds until the rst
acoustic signal:
appears on the
display.
To remove the wireless credentials,
Press and hold
Remote touch
button for 10 seconds until the second
acoustic signal:
appears on
the display.
If the connectivity is congured,
(Access Point) symbol is off and the
icon
will stop blinking and lit steadily
to conrm that the conguration was
successful.
13.2 Remote Start
When the App is installed and the
wireless connection is complete, you can
start and stop a program remotely by
activate remote start.
Activate Remote Start
Deactivate Remote Start
50 www.electrolux.com
NOTE
51
WARRANTY
G0026058-001-A17711805
