Loading ...
Loading ...
Loading ...
HRC-Launch Control System
Adjustments for Competition 141
The HRC-Launch
Control System reduces slip and
assists for an effective start by temporarily
decreasing the rev limit when starting.
You can select the rev limit level while the system
is operating according to your skill and track
conditions.
To change the level
1. Start the engine and wait more than 2 seconds.
2. Close the throttle completely, press and hold
the start button (1) while pulling the clutch
lever in until the launch control system
indicator (2) blinks (purple).
– The system goes into standby, and the
launch control system indicator indicates
the selected level by blinking (purple).
– From standby, the control to decrease the rev
limit starts.
– The system may become disabled if you
snap the throttle excessively.
– If the idle speed is low, the system may not
go into standby. Set the idle speed to
standard rpm, see page 72.
– To disable the system, quickly press the start
button. The launch control system indicator
stops blinking.
3. Press and hold the start button. The level
changes every time you press and hold.
– The level selected last is saved.
– The factory setting is level 2.
4. To continue using the system, refer to step 2 in
To operate the system (next page).
To disable the system, quickly press the start
button. The launch control system indicator
stops blinking and the system is disabled.
(1) start button
(2) launch control system indicator (purple)
Level
Rev limit during
launch control
Number of launch control
system indicator blinks
1 High 1
2 Middle 2
3 Low 3
(1)
(2)
Level 1
Level 2
Level 3
: Pressing and holding the start button
while the launch control system is in
standby
Loading ...
Loading ...
Loading ...