Loading ...
Loading ...
Loading ...
Installing the appliance
70
Installing the appliance
P
ush the appliance into the niche
until the covers of the fixing brackets
touch the front edge of the side walls
of the housing unit.
– W
ith 16 mm thick walls:
The spacers should touch the front
edge of the top and bottom of the
side walls of the housing unit.
– W
ith 19 mm thick furniture
walls:
The front edges of the hinges are
flush with the front edge of the
housing unit.
Mak
e sure that the covers of the top
and bottom fixing brackets lie flush
with the front edges of the housing
unit side walls.
This will create a gap all round of
42 mm t
o the front edges of the
housing unit side walls.
On furniture with door fittings (e.g.
stubs, seals etc.) the dimension of
these must be tak
en into account
when making sure there is a gap all
round of 42 mm.
P
ull the appliance forwards by the
appropriate dimension.
The hinges and covers will now
pr
otrude by the dimension of the door
fitting.
Useful tip: Remove the door fittings.
This will ensu
re that the door is flush
with the surrounding kitchen unit
furniture doors.
Align the appliance on both sides
by alt
ering the adjustable feet using
the spanner supplied.
Loading ...
Loading ...
Loading ...