Loading ...
Loading ...
Loading ...
Switching on and off
18
Before using for the first time
Packaging material
Remo
ve all packaging material from
the inside of the appliance.
Cleaning
Please refer to the relevant
in
structions in "Cleaning and care".
Clean the inside of the appliance and
the accessories.
Operating the appliance
A light touch of the finger on the
sensors is al
l that is required to operate
this appliance.
Each touch of a sensor is confirmed
with a k
eypad tone. The keypad tone
can be switched off if you wish (see
"Further settings").
Switching on
When the appliance is connected to the
electrical supply, the mains connection
symbol will appear in the display
aft
er a short while.
Touch the On/Off sensor.
The mains connection symbol
goes
out and the temperature appears in the
display. Two bars will flash in the
display while the current temperature is
above 0 °C.
The appliance begins to cool.
The t
emperature display and the alarm
symbol will flash at the same time
until the required temperature is
reached.
When the appliance door is opened, the
int
erior lighting comes on and the LED
lighting becomes brighter until it
reaches its maximum brightness.
To enable the temperature to get
sufficiently cold inside the appliance,
all
ow the appliance to run for a few
hours before placing food in it.
Loading ...
Loading ...
Loading ...