Loading ...
Loading ...
Loading ...
The correct temperature
21
Setting the temperature
Use the two sensors underneath the
display t
o set the temperature.
By touching the sensor
– the temperature will get colder,
– the temperature will get warmer.
While the temperature is being set, the
t
emperature value will flash.
The following information appears in
the display while the senso
rs are being
touched:
– When first tapped: The last
t
emperature selected flashes.
– Each subsequent touch of a sensor:
Th
e temperature is adjusted in 1 °C
steps.
– Leaving a finger on the sensor
cha
nges the temperature
continuously.
Approximately 5 seconds after the last
time a senso
r has been touched, the
current temperature inside the
appliance is automatically shown.
or
T
ouch OK to confirm your selection.
If you have adjusted the temperature,
wait for appr
ox. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full befor
e checking the temperature
display, as it will take this long for the
appliance to give an accurate reading.
If,
after this time, the temperature is
still too high or too low, you will need
to adjust it again.
Temperature range
The temperature can be adjusted
between
-15 °C and -28 °C.
Loading ...
Loading ...
Loading ...