Loading ...
Loading ...
Loading ...
34
En
05
Additional Picture Adjustment Options
Manual Screen Sizing
Manually select an appropriate screen size if an image fails to appear in the correct format. Browse the menu for
the specific video signal’s correct screen size.
The selectable screen sizes differ depending on the type of input signal. While watching video content, press
SCREEN SIZE on the remote control to cycle the picture through Auto, FULL, Dot by Dot, ZOOM, CINEMA, 4:3,
WIDE, WIDE 1, WIDE 2, FULL 14:9 and CINEMA 14:9. Freely change the screen size during video from other input
sources. Auto is available when receiving HD pictures.
The following chart provides information about how the screen appears for each option.
With WIDE 1 or WIDE 2 selected, a High Definition (HD) picture image or menu may run off the edge of the
screen. If an image or menu appears cut or cropped, change the option to FULL.
Avoid showing signals that fill only part of the screen. Images that fail to fill the screen may cause temporary or
permanent image retention depending on the frequency and duration. For example, an HD picture with side
masks (4:3 content) causes uneven wear of the plasma cells. If side masks appear around a broadcast, after that
movie or program is over, switch to a full screen motion video. This action helps the panel balance wear for the
plasma cells and guard against after-image issues. For more information about Masks, refer to “5.3.1 Adjust for
Screen Masking (black bars on sides).”
Note:
Not all video signals carry alternative screen sizes.
AV Option Description
Auto adds side masks or displays the image in full
screen when detecting HD pictures containing side
masks (See Detect Masks on page 36)
FULL (FULL 14:9) squeezes 16:9 (14:9) images
Dot by Dot
matches input signal to the same number of screen
pixels (available for 1080i or 1080p signals only)
ZOOM bars may appear on the top and bottom on some
pictures that are 16:9 letterbox
CINEMA
CINEMA 14:9
bars may appear on the top and bottom on some
pictures that are 14:9 letterbox (available for SD
signals only)
4:3 side bars appear on each side
WIDE pictures progressively stretch toward each side
(available for SD signals only)
WIDE 1 pictures progressively stretch toward each side
(available for HD signals only)
WIDE 2 pictures evenly stretch toward each side (available
for HD signals only)
PC Option Description
4:3 fills without altering the input signal aspect ratio
FULL shows 16:9 screen display
PRO-141FD_PRO-101FD.book Page 34 Tuesday, May 13, 2008 2:32 PM
Loading ...
Loading ...
Loading ...