Loading ...
Loading ...
Loading ...
Wired network setting (Auto)
If there is a DHCP server on the local area network (LAN)
via wired connection, this recorder will automatically be
allocated an IP address.
1 Press HOME.
2 Use b/B to select the [Setup], and press OK.
3 Use b/B to select the [Network] option.
4 Use v/V to select the [Wired LAN Setup], and press
OK.
5 Use v/V to select the [Auto], and press OK.
If you want to set the IP address of the DNS server,
use v V/b/B to select the [DNS server IP
address] field and input the IP address using
numerical buttons.
6 Use v/V to select the [OK], and press OK.
7 Use b/B to select the [OK], and press OK.
Wired network setting (Manual)
If there is no DHCP server on the network and you want
to set the network manually, follow the instructions as
below.
1 Follow the steps 1-3 from “Wired network setting
(Auto)” on page 15.
2 Use v/V to select the [Wired LAN Setup], and press
OK.
3 Use v/V/b/B to move to the [IP Address], [Subnet
Mask], [Gateway] and [DNS Server] fields, and fill
them using numerical buttons.
4 Press OK when you finish inputting all the network
information.
5 Use b/B to select the [OK], and press OK.
15
Preparation:
Before setting the wired network, you need to:
– connect the broadband internet to your home
network.
Loading ...
Loading ...
Loading ...