Loading ...
Loading ...
Loading ...
Black plate (344,1)
北米Model "A1160BE-C" EDITED: 2014/ 3/ 17
7-14
Starting and operating/Remote engine start system
! Before starting the hybrid system
Before using the remote engine start
system to start the hybrid system, confirm
the following conditions.
. The select lever is in the “P” position.
. All doors including the rear gate are
closed.
. The engine hood is closed.
. The push-button ignition switch is in the
“OFF” position.
! Starting the hybrid system
To start the hybrid system with remote
engine start system, briefly press the lock
button twice within 2 seconds, then press
and hold the lock button for 3 seconds.
1. Press the lock button briefly. The
hazard warning flashers then flash once.
2. Within 2 seconds, press the lock
button briefly again. The hazard warning
flashers then flash once again.
3. After step 2, immediately press and
hold the lock button. The hazard warning
flashers then flash once.
4. Approximately 3 seconds after step 3,
release the lock button. The hybrid system
will then start successfully.
! Stopping the hybrid system
Press and hold the lock button to stop the
hybrid system with remote engine start
system.
! Automatic engine shutdown
Theremoteenginestartsystemwill
automatically shut down or will not start
the hybrid system under the fol lowing
conditions.
. The total run-time has exceeded 20
minutes.
. Any door or the rear gate is opened.
. The select lever is moved to any
position other than “P”.
. The engine hood is opened.
. Thepush-buttonignitionswitchis
pressed.
. The brake pedal is depressed.
. The engine speed is 3,000 rpm or
more.
The time setting until the hybrid system
automatically stops can be changed. To
change it, please contact your SUBARU
dealer. Note that some settings may
violate state, provincial, or local laws and
regulations. Check the laws in your area to
determine which setting is permitted.
& Entering the vehicle while it
is running via remote start
1. Unlock the vehicle doors using the
keyless access function or remote keyless
entry system. If the vehicle’s doors are
unlocked manually using the key, the
vehicle’s alarm system will trigger (if the
alarm system is armed prior to activating
the remote engine start system) and the
hybrid system will turn off. Perform either
of the following procedures to disarm the
alarm system. Refer to “Alarm system”
F2-22.
. Turn the push-button ignition switch
to the “ACC” or “ON” position.
. Press any button on the access key.
2. Enter the vehicle.
3. The hybrid system will shut down
when any door or rear gate is opened.
4. Press the push-button ignition switch
while depressing the brake pedal to restart
the hybrid system.
& Entering the vehicle follow-
ing remote engine start shut-
down
An alarm trigger may occur if the vehicle is
opened by the remote keyless entry
transmitter within a few seconds immedi-
ately following remote engine start shut-
down.
Loading ...
Loading ...
Loading ...