User Manual - Page 330

For 2014 XV CROSSTREK HYBRID TOURING.

Loading ...
Loading ...
Loading ...
Black plate (341,1)
Model "A1160BE-C" EDITED: 2014/ 3/ 17
! Starting the hybrid system
WARNING
Never drive the vehicle if the indi-
cator on the push-button ignition
switch flashes in green after the
hybrid system has started. The
steering is still locked, and it may
result in an accident.
CAUTION
. When the operation indicator on
the push-button ignition switch
flashes in orange, there may be a
malfunction in the vehicle. Con-
tact a SUBARU dealer immedi-
ately.
. If the indicator on the push-
button ignition switch flashes in
green after the hybrid system has
started, it means that the steering
is still locked. Depress the brake
pedal while moving the steering
wheel to the right and left, and
press the push-button ignition
switch.
. Do not continue pushing the
push-button ignition switch for
more than 10 seconds. Doing so
could cause a malfunction. If the
hybrid system does not start,
stop pushing the push-button
ignition switch. Wait 10 seconds,
and then push the push-button
ignition switch to start the hybrid
system.
NOTE
. When the push-button ignition
switch is pressed while depressing
thebrakepedal,theenginestarter
operates for a maximum of 10 seconds
and after starting the engine, the starter
stops automatically.
. When the push-button ignition
switch is pressed while depressing
the brake pedal, the hybrid system
can be started regardless of the status
of the push-button ignition switch.
. If the security indicator light illumi-
nates when you attempt to start the
hybrid system but the system does not
start, press the push-button ignition
switch to switch the power to off and
then try to start the hybrid system
again.
. If the hybrid system does not start,
press the push-button ignition switch
without depressing the brake pedal to
switch the power to off. Then, while
depressing the brake pedal more for-
cefully, press the push-button ignition
switch.
. The hybrid system start procedures
may not function depending on the
radio wave conditions around the ve-
hicle. In such a case, refer to Starting
hybrid system F9-24.
. If the 12 V auxiliary battery is run
down, the steering cannot be unlocked.
Charge the battery.
When the push-button ignition switch is
pressed while depressing the brake pedal,
the engine will start. If the hybrid system
starts after the engine has started, the
hybrid READY indicator light on the
combination m eter will illuminate. The
starting procedure is as follows.
1. Carry the access key, and sit in the
drivers seat.
Starting and operating/Starting and stopping the hybrid system
7-11
CONTINUED
7
Loading ...
Loading ...
Loading ...