User Manual - Page 304

For 2014 XV CROSSTREK HYBRID TOURING.

Loading ...
Loading ...
Loading ...
Black plate (313,1)
Model "A1160BE-C" EDITED: 2014/ 3/ 17
& Map lights
Type A
Type B
To turn on the map light, push the switch.
To turn it off, push the switch again.
NOTE
For the type A map lights, although the
light switches are in the ON position,
the lights are automatically turned off
after approximately 30 seconds of
illumination to prevent the 12 V aux-
iliary batter y from discharging. For
details, refer to Battery drainage pre-
vention function F2-7.
! Automatic illumination (models
with moonroof)
The map lights illuminate automatically in
the following cases.
. Any of the doors other than the rear
gate is opened. (The map lights do not
illuminate when only the rear gate i s
opened.)
. The doors are unlocked using the
keyless access function (if equipped).
Refer to Locking and unlocking with
keyless access entry function F2-13.
. The doors are unlocked using the
remote keyless entry system. Refer to
Remote keyless entry system F2-18.
. The ignition switch is turned from the
ACC position to the LOCK (off) posi-
tion.
& OFF delay timer
The following lights have an automatic
illumination function.
. dome light
. map light (type A)
After being illuminated automatically,
these lights remain on for several seconds
and then gradually turn off under the
following conditions.
. after all doors and the rear gate are
closed (dome light)
. after all doors are closed (type A map
light)
While the lights are illuminated, if any of
the following operations are performed,
the lights turn off immediately.
. The ignition switch is turned from the
LOCK (off) position to the ACC or ON
position.
. All doors and the rear gate are locked
using the keyless access function (if
equipped).
. All doors and the rear gate are locked
using the remote keyless entry system.
The setting for the period of time in which
the lights remain on (OFF delay timer) can
be changed by a SUBARU dealer. Con-
tact your SUBARU dealer for details. The
setting can be changed by operating the
Interior equipment/Interior lights
6-3
CONTINUED
6
Loading ...
Loading ...
Loading ...