Loading ...
Loading ...
Loading ...
Safety
–
Ensur
e that the fl
oor mats ar
e securely fas-
tened during the trip and do not obstruct
the pedals
›››
.
Only use fl
oor mats which l
eav
e the pedals
clear and which are secured to prevent them
from slipping. You can obtain suitable floor
mats from a specialised dealership. Fasten-
ers* for floor mats are fitted in the footwells.
If a brake circuit fails, the brake pedal must be
pressed down thoroughly in order to stop the
vehicle.
Wear suitable footwear
Always wear shoes which support your feet
properly and give you a good feeling for the
pedals.
WARNING
●
Restricting pedal operation can l
ead to
critical situations while driving.
●
Never lay or fit floor mats or other floor
coverings over the original floor mats. This
would reduce the pedal area and could ob-
struct the pedals. Risk of accident.
●
Never place objects in the driver footwell.
An object could move into the pedal area
and impair pedal operation.
Seat belts
The whys and wher
ef
or
es of
seat belts
Control lamps
It lights up red
Driver or passenger has not fastened seat belt.
Objects on the front passenger seat.
Remov
e the objects from the front passenger seat
and store them safely.
The control lamp lights up t
o r
emind the
driv
er to fasten their seat belt.
Before starting the vehicle:
●
Fasten your seat belt securely.
●
Instruct your passengers to fasten their
seat belts properly before driving off.
●
Protect children by using a child seat ac-
cording to the child's height and weight
›››
page 26.
When starting to drive, if the vehicle's speed
exceeds approx. 25 km/h (15 mph) and the
seat belts are not fastened or are unfastened
while driving, a warning sound will be heard
for a few seconds. The warning light will also
flash .
The lamp goes out when the driver and
passenger seat belts are fastened with the
ignition switched on.
Rear seat belts fastened display*
Fig. 5
Indication of seat belt status in the rear
seats on the instrument panel displ
ay
When the ignition is switched on, the status
displ
ay of the seat belts
›
›
›
Fig. 5 informs the
driver on the instrument panel display wheth-
er the occupants of the rear seats have their
seat belts fastened.
It indicates that the corresponding seat
is empty.
Indicates that the seat is occupied and
the occupant is wearing the seat belt.
The seat belt status flashes for a maximum of
30 seconds when a seat belt in the rear seats
is unfastened while the vehicle is in motion. An
14
Loading ...
Loading ...
Loading ...