Loading ...
Loading ...
Loading ...
Operation
WARNING
Improper use of the socket or electrical de-
vices could lead t
o a fire and cause serious
injuries.
●
Never leave children unsupervised in the
vehicle. The socket and equipment con-
nected to it can be used when the ignition is
switched on.
●
Should a connected electrical device
overheat, switch it off and unplug it imme-
diately.
CAUTION
●
Take int
o account the operating instruc-
tions of the devices to be connected!
●
Never exceed the maximum power rating
as this could damage the vehicle's general
electrical system.
●
To avoid damaging the vehicle’s electri-
cal system, never connect accessories
supplying power such as solar panels or
battery chargers for charging the 12-volt
battery to the 12-volt power socket.
●
Only use accessories with approved
electromagnetic compatibility according
to current regulations.
●
To avoid damage due to voltage fluctua-
tions, switch off all devices connected to
the 12 V power sockets before switching the
ignition on or off and before starting the
drive system.
●
Never connect an appliance t
o the 12 volt
power socket that consumes more than the
power indicated in watts. Exceeding the
maximum power absorption could damage
the vehicle's electrical system.
Note
●
Unshiel
ded equipment can cause inter
-
ference on the radio equipment and the ve-
hicle's electrical system.
●
Interference can occur on the radio's AM
waveband if electrical appliances are used
near the aerial.
Smartphone support
P
or
t
able smartphone holder
Fig. 106
Assembling the universal support and
the hol
ding arm.
Fig. 107
In the centre console: close the com-
partment wher
e the inf
ot
ainment system is
housed.
Removing the smartphone
●
Grip the smartphone firmly with one hand.
●
Press the release button
›
›
›
Fig. 107
5
until
the t
op arm of the univ
ersal hol
der disengag-
es.
●
Remove the smart phone and, as the case
may be, unplug any cables.
Inserting a smart phone
●
If necessary, install the smartphone hous-
ing
›››
.
●
Connect the smartphone.
●
Place the smartphone on the bottom
mountings. T
o adjust the bott
om mountings,
pr
ess button
›››
Fig. 107
4
.
98
Loading ...
Loading ...
Loading ...