Kobalt SM3017LW User Manual

Loading ...

Left/Right 48° Bevel Adjustment

(Fig. 17, 18) :

ŏ Turn the left bevel detent block (1) to 48°

position.

ŏ Adjust the left and right side 48° bevel angle

using the same instructions given above for

adjusting the 45° bevel.

MITER SCALE (FIG. 19)

The sliding compound miter saw scale can be easily

read, showing miter angles from

0° to 55° left and

0° to 60° right. The most common angle settings

have positive stops at 0°,15°, 22.5°, 31.6°, 45° left

and right and 60° right only. These positive stops

position the blade at the desired angle quickly and

accurately. Follow the instructions below for quickest

and most accurate adjustments.

To Adjust Miter Angles:

ŏ Lift up on the miter lock handle (1) to unlock

the table.

ŏ Move the table while pressing down on

the positive stop locking button (2) to align the

pointer (3) to the desired degree measurement.

ŏ If the desired angle is one of the ten positive

stops, press down the positive stop locking

button (2) , making sure it snaps into position,

then secure by pressing down the miter

handle (1).

ŏ If the miter angle desired is not one of the ten

positive stops, simply lock the miter table into

position by pressing down on the miter lock

handle (1).

Miter Angle Pointer Adjustment (Fig. 19):

ŏ Move the table to the 0° positive stop.

ŏ Loosen the screw (4) that holds the

pointer (3) with a Phillips screwdriver.

ŏ Adjust the pointer (3) to the 0° mark and

retighten the screw (4).

Loading ...

Kobalt SM3017LW 12-in 15-Amp Dual Bevel Sliding Compound Corded Miter Saw