Loading ...
Loading ...
Loading ...
Step9
~imble (aRati totie wdl orfloor)
FlexDud
Blowe
Scr
L~Ho” C’amp
>*
Blower
1. Removethe screw in the front ofthe blower
transition separating the blower transition from
the blowerhousing.
2. Place the hose clamp around the round end of
the blowertransition. Attach the flexduct to the
blowertransition using the hose clamp.
3. With the anti-tipbracket properly instied in
the floor,placethe long end ofthe thimble hto
the wd and screw it into place using the four
screws provided, one in each corner.
4. Place the hose clamp provided around the
short end ofthe thimble. Attach the opposite end
ofthe flex duct to the short end ofthe thimble
using the hose clamp.
5. Plug the range into the wd.
6. CarefuUypush the range back into position.
Avoidpinchingthe transition piece or flexduct
7. Using the guide screw to locate the hole in
the rear ofthe blower housing, position the
transitionhside the blowerhousing.Rotatethe
transitionunti the holeinthefrontoftheblower
housingistigned. Securethetransitionwiththe
screwprovided.
8. Sed auductjointswithducttape.
9. Checkundertherangetobe surethe levehg
legisfullyengagedinthe anti-tipbracket
10. hsti the storagedrawer.
Fii Duct Connection tiou@ the moor
e
1. Attachthe rubbergasket
\
aroundthe edge ofthe
transitionpiece.me flatside
/“\.
ofthe rubbergasket should
--
be onthe underside ofthe
transitionpiece.
2. Placethe roundendtransitionpieceintothe
floor.Securethetransitionpieceusingthe 8
screwsprovidedintie kit YoumustM the edge
ofthe rubbergaskettoinstallthe screws.Make
surethe roundedgeofthegasketisfacingup.
3. Insertthefloorelbowductintothe transition
piece.me tide flze must face
towardthe
front of the -e. Attach the floor elbowduct
to ductplate using the two screws provided.
Tighten onlythe front screw.
4. Attach the floor elbow duct to the blower
using the 8 screws provided.me floor elbow
duct should be inside the blower.
5. Plug the range into the wd.
FloorElbow
Blower
Duet\
/
tape,
TranstionPie@
\ FloorPlate
6. Pushthe rmge intoposition.Makesure
thatthefloorelbowductis directiyoverthe
transitionpieceandrubbergasket me rubber
gasketfi provideased be~een the floor
elbowandthe transitionpiece.Seethe above
Uustration.
7. hosen thefrontscrewattachingthefloor
elbowductplateandthefloorelbowduct Sfide
thefloorelbowductplatedowntightagainstthe
rubbergasketandtightenthe screw.
8. Sed thejointbetweentheblowerandelbow
trmsitionpiecewithducttape.Checkunderthe
rangetoensurethe anti-tipbracketisengaged.
9. Insti the storagedrawer.
54
Loading ...
Loading ...
Loading ...